668742

LifeScan OneTouch UltraMini - Blood Glucose Monitoring System Manual

21
Zoom out
Zoom in
Previous page
1/31
Next page
18
CONTROL SOLUTION TESTING
Control solution testing
When to test with control solution
OneTouch® Ultra® Control Solution contains a known amount of glucose and is used to check that the meter and the test strips are working
properly.
How to test with control solution
Start with the meter o. If you have turned the meter on to change settings or review past results, turn it o.
Check the code on the test strip vial before inserting the test strip
Insert a test strip to turn on the meter
Make sure the three contact bars are facing you. Push the test strip in as far as it will go. Do Not bend the test
strip.
Match the code on the meter with the code on the test strip vial
If the code on the meter does not match the code on the test strip vial, press ▲ or ▼ to match the code
number on the test strip vial. The new code number will ash on the display for three seconds, and then stay
constant for three seconds. The display will advance to the screen with the ashing blood drop icon
R
.
If the codes already match, wait three seconds. The display will advance to the screen with the ashing blood
drop icon
R
.
Mark the test as a control solution test
IMPORTANT: • Mark all control solution tests with CtL. This will stop them from
being stored as blood glucose results.
• Control solution results marked with CtL are not stored in the
meter’s memory.
CAUTION: Do Not swallow control solution; it is not for human consumption. Do Not apply control solution to the skin or eyes
as it may cause irritation.
Do a control solution test:
• to practice the test process instead of using blood,
• once a week,
• whenever you open a new vial of test strips,
• if you suspect the meter or test strips are not working properly,
• if you have had repeated unexpected blood glucose results as
described in Applying blood and reading results in Section 3, or
• if you drop or damage the meter.
NOTE:
• Use only OneTouch® Ultra® Control Solution with your OneTouch®
UltraMini® Meter.
• Control solution tests must be done at room temperature
(68–77°F). Make sure your meter, test strips, and control solution
are at room temperature before testing.
(Example)
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeScan OneTouch UltraMini - Blood Glucose Monitoring System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeScan OneTouch UltraMini - Blood Glucose Monitoring System in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info