552437
12
Zoom out
Zoom in
Previous page
1/22
Next page
11
4. Handlebar and Computer Installation
Insert the Hand Pulse Sensor Wires (6) into the hole on the Handlebar Post (14) then pull
them out from the top end of the Handlebar Post (14).
Place the Handlebar (4) through clamp on the Handlebar Post (14) with hand pulse sensors
facing the seat.
Hold the Handlebar (4) in desired position and fasten Clamp Cover (12), Ø12x1.5x20 Spacer
(10), and M8x55 Handlebar T-Knob (9) onto clamp. Tighten the M8x55 Handlebar T-Knob
(9) after adjustment.
NOTE: Handlebar T-Knob should be tightly secured before using.
Remove four M5x12mm Bolts (77) from the back of the Computer (1). Remove bolts with
the Multi Hex Tool with Phillips Screwdriver provided.
Connect the Hand Pulse Sensor Wires (6) and Computer Extension Wire II (3) to the wires
that come from the Computer (1). Tuck wires into the Handlebar Post (14). Attach the
Computer (1) onto the top end of the Handlebar Post (14) with four M5x12mm Bolts (77) that
were removed. Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
14
77
10
9
1
12
4
3
6
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Transport Pro Magnetic Upright Bike 20696 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Transport Pro Magnetic Upright Bike 20696 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info