552433

LifeGear Transport Pro Magnetic Elliptical Trainer 93690 Manual

22
Zoom out
Zoom in
Previous page
1/26
Next page
21
Heart Rate Control Programs:
Program 10 to Program 12 are the Heart Rate Control Programs. In Program 10 to
Program 12, press the ENTER button to select TIME, DISTANCE, CALORIES, and AGE.
Then press the UP or DOWN button to adjust the values. Users may exercise in a period of
time, a certain distance, or a certain calories want to burn with 60% Max Heart Rate in
Program10, 75% Max Heart Rate in Program 11, and 85% Max Heart Rate in Program 12.
After pressing the START/STOP button to exercise, please also hold both two hands on
handlebar grip sensors during exercise. In these programs, the computer will adjust the
level of loading according to the heart rate detected. For example, the level of loading may
increase while the heart rate detected is lower than TARGET H.R.. Also, the level of
loading may decrease while the heart rate detected is higher than TARGET H.R.. As a
result, the user’s heart rate will be adjusted to close the TARGET H.R. in the range of
TARGET H.R. –5 and TARGET H.R. +5.
If you pre-set target values of TIME, DISTANCE, or CALORIES, the values will count down.
When one of the values of TIME, DISTANCE, or CALORIES counts down to 0, the computer
will begin beeping to remind you and will stop operating. Press the START/STOP button to
exercise again.
User Setting Program:
Program 13 is the user setting program. User is free to set the values in the order of TIME,
DISTANCE, CALORIES, AGE, and the level of loading in 10 intervals. Press the ENTER
button to select TIME, DISTANCE, CALORIES, AGE, and interval. Then press the UP or
DOWN button to adjust the values and level of loading. The profile will be stored in the
memory after setup. After pressing the START/STOP button to exercise, please also hold
both two hands on handlebar grip sensors during exercise. User may also change the
ongoing loading in each interval by pressing the UP or DOWN button. With the input of
age, the computer may suggest a target heart rate to exercise. The suggested heart rate is
70% (220 - age). For example, if you are 30 years old, your calculations will be as follows:
220 - 30 = 190 (maximum heart rate)
190 x 70% (0.70) = 133 (70% of your maximum heart rate)
30 year-old (THR) Target Heart Rate would be 133
If the heart rate detected equals to or greater than the TARGET H.R., the value of HEART
RATE will keep flashing. Please note that it is a warning for users to speed down or to
lower the level of loading.
If you pre-set target values of TIME, DISTANCE, or CALORIES, the values will count down.
When one of the values of TIME, DISTANCE, or CALORIES counts down to 0, the computer
will begin beeping to remind you and will stop operating. Press the START/STOP button to
exercise again.
ADJUSTMENT
Adjusting the Adjustable Leveler
Turn the adjustable leveler on the rear stabilizer
as needed to level the elliptical trainer.
Adjustable Leveler
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Transport Pro Magnetic Elliptical Trainer 93690 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Transport Pro Magnetic Elliptical Trainer 93690 in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info