552422

LifeGear Streamline - Basic Magnetic Upright Bike 20565 Manual

10
Zoom out
Zoom in
Previous page
1/14
Next page
9
3. Install the Handlebar Post and Tension Control
Knob.
Remove four M8x15 Bolts (24) and Ø8 Curve
Washers (37) from the tube of the Main Frame (1).
Insert the Tension Cable (60) through into the bottom
hole of Handlebar Post (3) and pull it out from the
square hole of Handlebar Post (3). Connect the
Sensor Wire (26) from the Main Frame (1) to the
Middle Section Sensor Wire (59) from the Handlebar
Post (3).
Insert the Handlebar Post (3) onto the tube of the
Main Frame (1) and secure with four M8x15 Bolts
(24) and Ø8 Curve Washers (37) that were removed.
Remove the M5x25 Bolt (57) and Ø5 Big Curve Washer (62) from the Tension Control Knob
(7). Put the cable end of resistance cable of Tension Control Knob (7) into the spring hook
of Tension Cable (60) as shown in drawing A of figure 3. Pull the resistance cable of
Tension Control Knob (7) up and force it into the gap of metal bracket of Tension Cable (60)
as shown in drawing B of figure 3. Attach the Tension Control Knob (7) onto the Handlebar
Post (3) with the M5x25 Bolt (57) and Ø5 Big Curve Washer (62) that were removed.
4. Install the Handlebar and Computer.
Remove two M8x15 Bolts (24) and Ø8 Curve
Washers (37) from the Handlebar Post (3).
Insert the Hand Pulse Sensor Wires (53) into the
hole on the Handlebar Post (3) and then pull them
out from the top end of the Handlebar Post (3).
Attach the Handlebar (2) onto the Handlebar Post (3)
with two M8x15 Bolts (24) and Ø8 Curve Washers
(37) that were removed.
Remove four M5x10 Bolts (47) from the Computer
(10). Connect the Hand Pulse Sensor Wires (53)
and Middle Section Sensor Wire (59) to the wires
that come from the Computer (10). Then attach the
Computer (10) onto the top end of the Handlebar Post (3) with four M5x10 Bolts (47) that
were removed.
AB
7
3
60
59
24
7
60
60
7
1
37
59
60
26
57
62
3
1
3
10
2
53
59
53
47
37
24
4
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Streamline - Basic Magnetic Upright Bike 20565 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Streamline - Basic Magnetic Upright Bike 20565 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info