552422

LifeGear Streamline - Basic Magnetic Upright Bike 20565 Manual

9
Zoom out
Zoom in
Previous page
1/14
Next page
8
ASSEMBLY INSTRUCTIONS
1. Install the Front/Rear Stabilizers and Foot
Pedals.
Attach the Front Stabilizer (6) onto the front curve
plate of the Main Frame (1) with two M10 Cap Nuts
(34), M10x57 Bolts (35), and Ø10 Big Curve
Washers (36).
Remove four M8x15 Bolts (24), Ø8 Spring Washers
(61), and Ø8 Curve Washers (37) from the Rear
Stabilizer (4). Then attach the Rear Stabilizer (4)
onto the rear tube of the Main Frame (1) with four
M8x15 Bolts (24), Ø8 Spring Washers (61), and Ø8
Curve Washers (37) that were removed.
Connect the Left Foot Pedal (20) to the left Crank
(19). Thread it into the crank assembly in the counterclockwise direction by the tool
provided.
Connect the Right Foot Pedal (21) to the right Crank (19) by threading it in the clockwise
direction.
NOTE: The Left and Right Foot Pedals (20, 21) and Crank (19) are marked with “L” & “R”
(left and right).
2. Install the Seat Cushion and Seat Post.
Remove three M8 Locknuts (42) and Ø8 Washers
(38) from underneath of the Seat Cushion (27).
Then attach the Seat Cushion (27) onto the triangle
plate of Seat Post (25) with three M8 Locknuts (42)
and Ø8 Washers (38) that were removed.
Insert the Seat Post (25) into the Bushing (12) on the
tube of the Main Frame (1) and then attach the Seat
Post Knob (8) onto the tube of the Main Frame (1) by
turning it in a clockwise direction to lock the Seat
Post (25) in the suitable position.
Adjusting the seat post:
Turn the Seat Post Knob (8) in a counterclockwise direction until the Seat Post (25) can be
slid up or down and then slide the Seat Post (25) up or down direction to the suitable position.
Lock the Seat Post (25) in place by tightening the Seat Post Knob (8) in a clockwise
direction.
NOTE: When adjusting the height of seat post, the maximum insert depth mark line
cannot higher than the edge bushing.
4
6
35
20
1
34
36
21
19
61
37
61
24
1
42
25
8
1
27
38
12
2
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Streamline - Basic Magnetic Upright Bike 20565 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Streamline - Basic Magnetic Upright Bike 20565 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info