552427
12
Zoom out
Zoom in
Previous page
1/16
Next page
11
5. Handlebar Post and Tension Control Knob Installation
Remove four M8x15 Bolts (24) and Ø22xØ8 Curve Washers
(36) from the Main Frame (1).
Slide the Handlebar Post Cover (57) up to the Handlebar Post
(3).
Insert the Tension Cable (60) through into the bottom hole of
Handlebar Post (3) and pull it out from the square hole of
Handlebar Post (3).
Connect the Sensor Wire (26) from the Main Frame (1) to the
Middle Section Sensor Wire (59) from the Handlebar Post (3).
Insert the Handlebar Post (3) onto the tube of the Main Frame
(1) and secure with four M8x15 Bolts (24) and Ø22xØ8 Curve
Washers (36) that were removed. Slide the Handlebar Post
Cover (57) down to the Main Frame (1).
Remove the M5x25 Bolt (48) and Ø5 Big Curve Washer (54)
from the Tension Control Knob (7). Put the cable end of
resistance cable of Tension Control Knob (7) into the spring
hook of Tension Cable (60) as shown in drawing A of figure 5.
Pull the resistance cable of Tension Control Knob (7) up and
force it into the gap of metal bracket of Tension Cable (60) as
shown in drawing B of figure 5. Attach the Tension Control
Knob (7) onto the Handlebar Post (3) with the M5x25 Bolt (48)
and Ø5 Big Curve Washer (54) that were removed.
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
6. Handlebar and Computer Installation
Remove two M8x15 Bolts (24) and Ø16xØ8 Curve
Washers (37) from the Handlebar Post (3).
Insert the Hand Pulse Sensor Wires (53) into the hole
on the Handlebar Post (3) and then pull them out from
the top end of the Handlebar Post (3).
Attach the Handlebar (2) onto the Handlebar Post (3)
with two M8x15 Bolts (24) and Ø16xØ8 Curve
Washers (37) that were removed.
Remove four M5x10 Bolts (47) from the Computer (10).
Connect the Hand Pulse Sensor Wires (53) and Middle
Section Sensor Wire (59) to the wires that come from
the Computer (10). Tuck wires into the Handlebar
Post (3).
Attach the Computer (10) onto the top end of the
Handlebar Post (3) with four M5x10 Bolts (47) that
were removed.
24
26
36
57
7
48
54
3
60
1
59
60
7
60
7
A B
Allen Wrench 6mm
Multi Hex Tool with Phillips
Screwdriver S13, S14, S15
Tool:
Allen Wrench 6mm
Multi Hex Tool with Phillips
Screwdriver S13, S14, S15
Tool:
53
59
2
24
37
10
47
3
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Gentle Revolution - Magnetic Upright Bike 20320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Gentle Revolution - Magnetic Upright Bike 20320 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info