552427
10
Zoom out
Zoom in
Previous page
1/16
Next page
9
ASSEMBLY INSTRUCTIONS
1. Front Stabilizer Installation
Remove two ST4.2x15 Bolts (46) from both Front
Left/Right Stabilizer End Caps (28, 29).
Slide both Front Left/Right Stabilizer End Caps
(28, 29) onto each end of the Front Stabilizer (6)
and align bolt holes.
Secure the Front Left/Right Stabilizer End Caps
(28, 29) with two removed ST4.2x15 Bolts (46) in
the bottom. Tighten bolts with the Multi Hex Tool
with Phillips Screwdriver provided.
Position the Front Stabilizer (6) in front of Main
Frame (1) and align bolt holes.
Attach the Front Stabilizer (6) onto the front curve
of the Main Frame (1) with two M8 Cap Nuts (34),
M8x70 Bolts (35), and Ø22xØ8 Curve Washers
(36). Tighten bolts with the Multi Hex Tool with
Phillips Screwdriver provided.
Hardware:
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
2. Rear Stabilizer Installation
Slide both Rear Left/Right Stabilizer End Caps (30, 31)
onto each end of the Rear Stabilizer (4).
Install two M10 Adjustable Levelers (32) with M10
Nuts (33) onto the Rear Stabilizer (4).
Position the Rear Stabilizer (4) behind the Main Frame
(1) and align bolt holes.
Attach the Rear Stabilizer (4) onto the rear curve of
the Main Frame (1) with two M8 Cap Nuts (34),
M8x70 Bolts (35), and Ø22xØ8 Curve Washers (36).
Tighten bolts with the Multi Hex Tool with Phillips
Screwdriver provided.
Hardware:
2 Cap Nuts (M8)
2 Bolts (M8x70) 2 Curve Washers (Ø22xØ8)
6
28
29
35
46
1
34
36
46
Tool:
Multi Hex Tool with Phillips
Screwdriver S13, S14, S15
2 Cap Nuts (M8)
2 Bolts (M8x70)
2 Curve Washers (Ø22xØ8)
4
30
31
33
32
35
34
36
1
Tool:
Multi Hex Tool with Phillips
Screwdriver S13, S14, S15
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Gentle Revolution - Magnetic Upright Bike 20320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Gentle Revolution - Magnetic Upright Bike 20320 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info