552453
11
Zoom out
Zoom in
Previous page
1/21
Next page
10
3. Front Handlebar Post, Tension Control Knob, and Foot Pedals Installation
Remove one Ø8xØ20x2 Big Curve Washer (4), one M8x15 Bolt (72), four M5x20 Bolts (35)
and four Ø8 Washers (36) from the tube of the Front Main Frame (21). Remove bolts with
the S5 Allen Wrench provided.
Slide the Front Handlebar Post Cover (41) up to the Front Handlebar Post (34).
Insert the Tension Cable (31) through into the bottom hole of Front Handlebar Post (34) and
pull it out from the square hole of Front Handlebar Post (34).
Connect the Extension Hand Pulse Sensor Wires I (70) and Sensor Wire (71) from the Front
Main Frame (21) to the Extension Hand Pulse Sensor Wires II (27) and Extension Sensor
Wire (26) from the Front Handlebar Post (34).
Insert the Front Handlebar Post (34) onto the tube of the Front Main Frame (21) and secure
with one Ø8xØ20x2 Big Curve Washer (4), one M8x15 Bolt (72), four M5x20 Bolts (35)
and four Ø8 Washers (36) that were removed. Tighten bolts with the S5 Allen Wrench
provided.
Slide the Front Handlebar Post Cover (41) down to the Front Main Frame (21).
Remove the Ø5xØ20x1.5 Big Washer (32) and M5x20 Bolt (33) and from the Tension
Control Knob (30). Remove bolt with the Multi Hex Tool with Phillips Screwdriver provided.
Put the cable end of resistance cable of Tension Control Knob (30) into the spring hook of
Tension Cable (31), see Figure A. Pull the resistance cable of Tension Control Knob (30)
up and force it into the gap of metal bracket of Tension Cable (31), see Figure B. Attach
the Tension Control Knob (30) onto the Front Handlebar Post (34) with the Ø5xØ20x1.5 Big
A
30
12
69
13
21
41
31
31
30
34
33
32
70
71
35
36
4
72
35
36
3
27
26
BA
30
30
31
31
Tool:
Allen Wrench S5
Multi Hex Tool with Phillips Screwdriver
S8, S13, S14, S15
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Formula Magnetic Recumbent Bike 26580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Formula Magnetic Recumbent Bike 26580 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info