552412

LifeGear Evoke - 2 in 1 Elliptical Trainer 93296 Manual

14
Zoom out
Zoom in
Previous page
1/21
Next page
13
4. Seat Post, Seat Cushion, and Seat Sliding Tube Installation
Insert the Seat Post (96) into the Plastic Bushing (97) on the tube of the Main Frame (1) and
then attach the Round Knob (98) onto the tube of the Main Frame (1) by turning it in a
clockwise direction to lock the Seat Post (96) in the suitable position.
Adjusting the seat height:
Turn the Round Knob (98) in a counterclockwise direction until it can be pulled out. Pull out
the Round Knob (98) and then slide the Seat Post (96) up or down direction to the suitable
position. Lock the Seat Post (96) in place by releasing the Round Knob (98) and sliding the
Seat Post (96) up or down slightly until the Round Knob (98) "pops" down into the locked
position. For added safety, tighten the Round Knob (98) in a clockwise direction.
NOTE: When adjusting the height of seat post, the maximum insert depth mark line
cannot higher than the edge of plastic bushing.
Remove three M8 Nylon Nuts (24) and Ø16xØ8x1.5 Washers (25) and from underside of the
Seat Cushion (100). Guide bolts on underside of the Seat Cushion (100) through holes on
top of the Seat Sliding Tube (101), attach with three removed M8 Nylon Nuts (24) and
Ø16xØ8x1.5 Washers (25) and tighten. Remove one Ø8 Big Washer (34) and Seat
Adjustment Knob (95) from underside of the Seat Sliding Tube (101). Guide bolt on
underside of the Seat Sliding Tube (101) through hole on top of the Seat Post (96), attach
with one removed Ø8 Big Washer (34) and Seat Adjustment Knob (95) and tighten.
Adjusting the seat forward or back:
Turn the Seat Adjustment Knob (95) to loosen the Seat Sliding Tube (101). Slide the Seat
Sliding Tube (101) forward or back to desired position and turn Seat Adjustment Knob (95) to
tighten.
NOTE: Continue to turn seat adjustment knob until seat sliding tube is secure before
exercising.
98
96
101
34
95
100100
2424
2525
97
1
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
Tool:
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Evoke - 2 in 1 Elliptical Trainer 93296 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Evoke - 2 in 1 Elliptical Trainer 93296 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info