552412
13
Zoom out
Zoom in
Previous page
1/21
Next page
12
3. Left/Right Handrail Arms, Left/Right Foot Bars, Left/Right Foot Pedals, and Foot Bar
Covers-A/B Installation
Remove two Ø10 Big Washers (8), M10x18 Bolts (43), Ø18xØ10.5x3 Spring Washers (44),
and Ø28x5 Washers (45) from the left and right horizontal axes of the Front Post (5). Then
attach the Left Handrail Arm (3L) onto the left horizontal axis of the Front Post (5) with one
Ø10 Big Washer (8), M10x18 Bolt (43), Ø18xØ10.5x3 Spring Washer (44), and Ø28x5
Washer (45) that were removed. Install a S16 Cap (49) onto the M10x18 Bolt (43).
Attach the left U Shape Bracket (23) to the left Crank (78) with one 1/2” Bolt for left U Shape
Bracket (16L), Ø28xØ17x0.3 Wave Washer (18), Ø20 Spring Washer (20), and 1/2” Left
Nylon Nut (17L). Install a S13 Cap (31) onto the M8x50 Bolt (26).
NOTE: 1/2” Bolt for left U Shape Bracket (16L) and 1/2” Bolt for right U Shape Bracket (16R)
are marked “R” for Right and “L” for Left.
Attach the Left Foot Pedal (36) onto the Left Foot Bar (2L) with three M6 Nylon Nuts (27),
Ø6 Washers (28), and M6x40 Bolts (29).
Attach the Foot Bar Covers-A/B (33L, 33R) onto the Left Foot Bar (2L) with two ST4.2x20
Screws (79).
Repeat above step to attach the Right Handrail Arm (3R) onto the right horizontal axis of the
Front Post (5) and right U Shape Bracket (23) to the right Crank (78).
Hardware:
6 Nylon Nut
(M6)
2 Cap
(
S1
3
)
2
Cap
(
S16
)
4 Screw
(ST4.2x20)
6 Washer
(Ø6)
6 Bolt
(
M6x40
)
(16L) Bolt for left U Shape
Bracket 1/2” 1 PC
(17L) Left Nylon Nut 1/2” 1 PC
(18) Wave Washer
Ø28xØ17x0.3 1 PC
(20) Spring Washer Ø20 1 PC
(16R) Bolt for right U Shape
Bracket 1/2” 1 PC
(17R) Right Nylon Nut 1/2” 1 PC
(18) Wave Washer
Ø28xØ17x0.3 1 PC
(20) Spring Washer Ø20 1 PC
Tool:
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
Allen Wrench 8mm
Multi Hex Tool
3L
28
27
29
79
2R
3R
5
31
51
45
43
44
49
8
2L
33L
79
33R
17L
20
16R
18
78
20
17R
16L
18
36
26
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Evoke - 2 in 1 Elliptical Trainer 93296 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Evoke - 2 in 1 Elliptical Trainer 93296 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info