549144

LifeGear Dynasty Elliptical Cross Trainer - PC 93805 Manual

20
Zoom out
Zoom in
Previous page
1/24
Next page
19
TRAINING IN PROGRAM MODE:
Press the UP or DOWN button to select the PROGRAM mode and then press the MODE
button for confirmation. There are 12 pre-set programs that offer you a variety of workout
options. To select a program, use the UP or DOWN button to select one of the pre-set
programs. Press the MODE button for confirmation and the TIME display will flash. At
this point you can press the START/STOP button to start your workout or you can set a
“TIME goal” as described above.
TRAINING IN USER PROGRAM MODE:
Press the UP or DOWN button to select the USER PROGRAM mode and then press the
MODE button for confirmation. The first interval of user program graphic will flash for
setting the load level. Press the UP or DOWN button to set the load level for the first
interval of user program profile. Press the MODE button to confirm the load level for the
first interval of user program profile. There are 20 intervals for setting the load level.
Repeat above steps to set the load level from the second interval to the twentieth interval.
After setting all the load level and then press and hold the MODE button for over 2 seconds,
the TIME display will flash. At this point you can press the START/STOP button to start
your workout or you can set a “TIME goal” as described in training in manual mode.
TRAINING IN H.R.C. MODE:
Press the UP or DOWN button to select the H.R.C. mode and then press the MODE button
for confirmation. There are 4 H.R.C. (Heart Rate Control) programs that offer you a variety
of workout options. To select a program, use the UP or DOWN button. If user selects
H.R.C. 55 and the target heart rate will display on the split window of PULSE according to
user’s age because user has inputted USER data (sex, age, height, and weight) after the
adapter connected to the electrical wall outlet. Press the MODE button for confirmation.
For instance, if user inputs age (25 years old), the calculations will be as follows:
220 - 25 = 195
195 x 55% (0.55) = 107 (55% of your maximum heart rate)
25 year-old male (THR) Target Heart Rate would be 107
At this point you can press the START/STOP button to start your workout or you can set a
“TIME goal” as described in training in manual mode.
After pressing the START/STOP button to exercise, please grip the hand pulse sensors
during exercise, the computer will adjust the load level according to the heart rate detected.
For example, the load level will increase while the heart rate detected is lower than Target
Heart Rate. Also, the load level will decrease while the heart rate detected is higher than
Target Heart Rate. As a result, the user’s heart rate will be adjusted equal to the Target
Heart Rate.
Use the same procedure to operate H.R.C. 75 or H.R.C. 90 as described above.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Dynasty Elliptical Cross Trainer - PC 93805 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Dynasty Elliptical Cross Trainer - PC 93805 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info