552449

LifeGear Classic Recumbent Bike 26380 Manual

12
Zoom out
Zoom in
Previous page
1/21
Next page
11
4. Seat Sliding Tube, Back/Seat Support Bracket, and Handlebar Installation
Remove eight Ø8xØ16x1.5 Washers (36) and eight M8x15 Bolts (72) from the Seat Sliding
Tube (52). Remove bolts with the S6 Allen Wrench provided.
Insert the Seat Sliding Tube (52) into the Bushings (61) of the Rear Main Frame (46).
Attach the Seat Sliding Tube (52) to the Back and Seat Support Bracket (53) with eight
Ø8xØ16x1.5 Washers (36) and eight M8x15 Bolts (72) that were removed. Tighten bolts
with the S6 Allen Wrench provided.
Adjust the seat position and insert the Round Knob (60) and Triangle Knob (23). Turn the
Round Knob (60) and Triangle Knob (23) in the clockwise direction to tighten.
Attach the Handlebar (68) onto the Back and Seat Support Bracket (53) with two M8x45
Bolts (57), two Ø8xØ20x2 Curve Washers (40), two Ø8xØ20x2 Big Washers (45), and two
M8 Cap Nuts (77). Tighten nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Connect the Middle Section Hand Pulse Sensor Wires (8) from the Rear Main Frame (46) to
the Hand Pulse Sensor Wires (56) from the Handlebar (68).
Hardware:
2 Curve Washers
(Ø8xØ20x2)
2 Big Washers
(Ø8xØ20x2)
2 Bolts (M8x45) 2 Cap Nuts (M8)
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
Allen Wrench S6
52
23
60
72
36
36
72
72
36
77
45
36
72
53
68
57
40
46
8
61
56
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Classic Recumbent Bike 26380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Classic Recumbent Bike 26380 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info