552449

LifeGear Classic Recumbent Bike 26380 Manual

10
Zoom out
Zoom in
Previous page
1/21
Next page
9
3. Front Handlebar Post and Foot Pedal Installation
Remove one Ø8xØ20x2 Curve Washer (40), one M8x15 Bolt (72), four M8x10 Bolts (35)
and four Ø8xØ16x1.5 Washers (36) from the Front Main Frame (21). Remove bolts with
the S6 Allen Wrench provided.
Slide the Front Handlebar Post Cover (7) up to the Front Handlebar Post (34).
Insert the Tension Cable (31) through into the bottom hole of Front Handlebar Post (34) and
pull it out from the square hole of Front Handlebar Post (34).
Connect the Sensor Wire (71) and Extension Hand Pulse Sensor Wires II (70) from the Front
Main Frame (21) to the Extension Sensor Wire (26) and Extension Hand Pulse Sensor Wires
I (27) from the Front Handlebar Post (34).
Insert the Front Handlebar Post (34) onto the tube of the Front Main Frame (21) and secure
with one Ø8xØ20x2 Curve Washer (40), one M8x15 Bolt (72), four M8x10 Bolts (35) and
four Ø8xØ16x1.5 Washers (36) that were removed. Tighten bolts with the S6 Allen Wrench
provided. Slide the Front Handlebar Post Cover (7) down to the Front Main Frame (21).
Remove the Ø5xØ20x1 Big Washer (32) and M5x20 Bolt (33) from the Tension Control Knob
(30). Remove bolt with the Multi Hex Tool with Phillips Screwdriver provided.
Put the cable end of resistance cable of Tension Control Knob (30) into the spring hook of
Tension Cable (31) as shown in drawing A of figure 3. Pull the resistance cable of Tension
Control Knob (30) up and force it into the gap of metal bracket of Tension Cable (31) as
shown in drawing B of figure 3. Attach the Tension Control Knob (30) onto the Front
Handlebar Post (34) with the Ø5xØ20x1 Big Washer (32) and M5x20 Bolt (33) that were
removed. Tighten bolt with the Multi Hex Tool with Phillips Screwdriver provided.
12
69
21
72
40
36
35
71
31
70
27
26
7
36
35
34
33
32
30
31
26
27
13
30
31
30
31
BA
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
Allen Wrench S6
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Classic Recumbent Bike 26380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Classic Recumbent Bike 26380 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info