715456

Liebherr UIKo 1560 Manual

9
Zoom out
Zoom in
Previous page
1/20
Next page
Fig. 16
uIf attaching the unit at the side, screw the fixing bracket
into the recess with one screw on each side.
4.3.2 Fitting the unit door
uFit the handle on the unit door.
Note
To ensure uniform extension of the pull-out compartment:
uAlways fit the unit door handle to the middle of the unit
door.
Fig. 17
uCheck 8 mm presetting. (Distance between appliance
door and lower edge of crosspiece)
uPush up assembly aids Fig. 17 (12) to unit door height.
Lower edge ▲of the assembly aid = top edge of the unit
door to be fitted.
uUnscrew fastening crosspiece Fig. 17 (11) by undoing the
locknuts Fig. 17 (10).
Fig. 18
uAttach fastening crosspiece Fig. 18 (11) to the inside of
the unit door using the assembly aids Fig. 18 (12).
uAlign the crosspiece Fig. 18 (11) in the middle of the door.
wDistances to the outer edge are equal at the left and
right.
For chipboard doors:
uSecure the fastening crosspiece Fig. 18 (11) with at least 6
screws Fig. 18 (19).
For frame and panel doors:
uSecure the fastening crosspiece Fig. 18 (11)with 4 screws
Fig. 18 (19) at the edge.
uRaise the assembly aids Fig. 18 (12) for removal, turn
them and insert them into the adjacent openings.
Fig. 19
uAttach the unit door to the adjusting bolts Fig. 19 (13) and
loosely screw the locknuts Fig. 19 (10) onto them.
uClose the door.
uCheck the gap between the door and the surrounding
unit doors.
uTo laterally align the door: push unit door in X direction.
uTo align the door vertically Y and in the lateral inclination:
adjust adjusting bolts Fig. 19 (13) with a screwdriver.
wThe unit door is flush and in alignment with the
surrounding unit fronts.
uTighten locknuts Fig. 19 (10).
Fig. 20
uTo screw the unit door to the appliance door:
uDrill pilot holes in the door of the unit (possibly make
preliminary holes with a bradawl).
uScrew the appliance door to the cabinet door using the
fixing bracket.
Fig. 21
uAlign the cabinet door to the height marked Z: loosen the
screws at the top and bottom of the door, then adjust the
door.
uDo not allow knobs and sealing
lips to make contact - important
for function!
uAllow an air gap of 2 mm between
the unit door and the body of the
unit.
Putting into operation
* Depending on model and options 9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr UIKo 1560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr UIKo 1560 in the language / languages: English as an attachment in your email.

The manual is 3.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr UIKo 1560

Liebherr UIKo 1560 User Manual - German - 18 pages

Liebherr UIKo 1560 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info