715456
7
Zoom out
Zoom in
Previous page
1/20
Next page
Fig. 5
The air flow cavity must be at least 200 cm².
The unit's energy consumption will increase if there is insuf
ficient air flow.
Fig. 6
Fix the foam pad in the middle of the plinth panel.
The foam pad is used to separate the incoming and
outgoing air flow and allows sufficient ventilation.
Unit door weight
Note
uBefore assembling the door of the unit, make sure that
the admissable weight of the unit door is not exceeded.
uOtherwise damage to the telescopic rails and resultant
malfunction cannot be ruled out.
Model
Maximum unit door
weight
S/UIKo / UPR 513 10 kg
Side fixing
qBase frame under a hard worktop, such as granite.
qThe appliance is lower than the work surface when the
adjusting feet are fully extended.
qPre-requisite: Side unit wall available for screw connec‐
tion.
Top fixing
qThe appliance is slightly braced under the work top when
the adjusting feet are fully extended.
qNo granite plate.
4.3.1 Installing the appliance
Fig. 7
uIf already in place, pull the plinth panel forwards.
uDetach the connecting cable from the rear of the
appliance, removing the cable holder at the same
time because otherwise there will be vibratory noise!
uLay the connecting cable with
the help of a string in such a
way that the appliance can be
easily connected after fitting.
Fig. 8
NOTICE
Risk of harm to flooring susceptible to damage!
uUnder each adjustable foot at the side, place a cardboard
strip approx. 100 mm x 600 mm. Cut the strips out of the
packaging. For recess heights of less than 826 mm, use
strips of a firm but thin material.
uAfter pushing the appliance in, remove the strips again.
Top fixing
Fig. 9
uInsert the bracket into the holder on the top of the unit
and bend towards the front.
uSlide the unit into the recess and level, see Levelling the
appliance.
Side fixing:
Fig. 10
uBend both brackets at one end before installation. Insert
the straight edge into the holder on the top of the unit
and bend towards the front.
uSlide the unit into the recess and level, see Levelling the
appliance.
Levelling the appliance
Putting into operation
* Depending on model and options 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr UIKo 1560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr UIKo 1560 in the language / languages: English as an attachment in your email.

The manual is 3.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr UIKo 1560

Liebherr UIKo 1560 User Manual - German - 18 pages

Liebherr UIKo 1560 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info