716906
12
Zoom out
Zoom in
Previous page
1/32
Next page
Fig. 26
uInsert the cable mirror inverted.
wThe black mark must be positioned on the edge of the
cable holder.
uSwing the cable holder in.
Fig. 27
uInsert the bearing bush from the other side and click into
place.
Fig. 28
uRelease the cover and remove from the side. Fig. 28 (1)
uRotate the cover 180° and clip onto the other side from
the right. Fig. 28 (2)
uClick the cover into place. Fig. 28 (3)
uPosition the screw with a T25 screwdriver. Fig. 28 (4)
uPosition the upper bearing bracket. Fig. 28 (5)
wPlace the pins in the provided screw holes.
uTighten the screw. Fig. 28 (4)
uInsert the screw with a T25 screwdriver and tighten.
Fig. 28 (6)
4.3.7 Moving the central bearing parts to the
other side
Fig. 29
uRemove the washer. Fig. 29 (1)
uRemove the screws with the T25 screwdriver. Fig. 29 (2)
uRemove the cover carefully. Fig. 29 (3)
uScrew the bearing bracket and the film rotated 180°
firmly onto the other side. Fig. 29 (4)
uAttach the cover rotated 180° onto the other side.
Fig. 29 (5)
uPush the washer in from the front. Fig. 29 (6)
4.3.8 Moving the lower bearing parts to the
other side
Fig. 30
uLift the bearing pin completely upward and remove.
Fig. 30 (1)
Putting into operation
12 * Depending on model and options
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SWTNes 4285 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SWTNes 4285 in the language / languages: English as an attachment in your email.

The manual is 2.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SWTNes 4285

Liebherr SWTNes 4285 User Manual - German - 34 pages

Liebherr SWTNes 4285 User Manual - Dutch - 34 pages

Liebherr SWTNes 4285 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info