57026
6
Zoom out
Zoom in
Previous page
1/16
Next page
4.5.3 Switching on the dispensing unit
To switch on the dispensing unit: (see 5.8.11) .
5 Control
5.1 Brightness of the temperature
display
You can adjust the brightness of the temperature display to the
light conditions of the room in which the appliance is installed.
5.1.1 Adjusting the brightness
The brightness is adjustable between h0 (no illumination) and
h5 (maximum luminosity).
uTo activate the setting mode: press the SuperFrost button
Fig. 2 (3)
for about 5 s.
wThe display indicates c.
wThe menu symbol
Fig. 2 (17)
shines.
uUsing the Up setting button, freezer compartment
Fig. 2 (5)
or Down setting button, freezer compartment
Fig. 2 (4)
,
select h.
uTo confirm: briefly press the SuperFrost button
Fig. 2 (3)
.
uTo make the display brighter:
press Up button, freezer
compartment
Fig. 2 (5)
.
uTo make the display darker:
press Down button, freezer
compartment
Fig. 2 (4)
.
uTo confirm: press SuperFrost
button
Fig. 2 (3)
.
wThe brightness is adjusted to the new value.
uTo deactivate the set-up mode: press On/Off button, freezer
compartment
Fig. 2 (1)
.
-or-
uWait for 5 minutes.
wThe temperature is indicated again in the temperature
display.
5.2 Contrast of the temperature display
You can adjust the contrast between lettering and background
in the temperature display.
5.2.1 Adjusting the contrast
The contrast can be adjusted between 1 (low contrast) and 9
(high contrast).
uTo activate the setting mode: press SuperFrost button
Fig. 2 (3)
for about 5 s.
wThe display indicates C.
wThe menu symbol
Fig. 2 (17)
shines.
uUsing the Up setting button, freezer compartment
Fig. 2 (5)
or Down setting button, freezer compartment,
Fig. 2 (4)
select C.
uTo confirm: briefly press SuperFrost button
Fig. 2 (3)
.
uFor a higher contrast setting:
press Up button, freezer
compartment
Fig. 2 (5)
.
uFor a lower contrast setting:
press Down button, freezer
compartment
Fig. 2 (4)
.
uTo confirm: press SuperFrost
button
Fig. 2 (3)
.
wThe contrast is set to the new value.
uTo deactivate the setting mode: press On/Off button, freezer
compartment
Fig. 2 (1)
.
-or-
uWait for 5 minutes.
wThe temperature is indicated again in the temperature
display.
5.3 Child proofing
The child-proofing function enables you to make sure that the
appliance is not inadvertently switched off by playing children.
5.3.1 Setting the child lock function
uTo activate the setting mode: press SuperFrost button
Fig. 2 (3)
for about 5 s.
wThe display indicates c.
wThe menu symbol
Fig. 2 (17)
shines.
uBriefly press the SuperFrost button
Fig. 2 (3)
.to confirm.
When c1 is indicated in the
display:
uTto activate the child lock,
briefly press the SuperFrost
button
Fig. 2 (3)
.
wThe child lock symbol
Fig. 2 (21)
shines. c flashes in the
display.
When c0 is indicated in the display:
uto deactivate the child lock, briefly press the SuperFrost
button
Fig. 2 (3)
.
wThe child lock symbol
Fig. 2 (21)
goes out. c flashes in the
display.
uTo deactivate the set-up mode: press On/Off button, freezer
compartment
Fig. 2 (1)
.
-or-
uWait for 5 minutes.
wThe temperature is indicated again in the temperature
display.
5.4 Door alarm
For refrigerator/BioFresh compartment and freezer compart-
ment
If the door is open longer then 60 s, the audible alarm sounds.
The audible alarm is automatically silenced when the door is
closed.
5.4.1 Muting the door alarm
The audible alarm can be muted when the door is open. The
sound switch-off function is active as long as the door is left
open.
uPress alarm button
Fig. 2 (2)
.
wThe door alarm is silenced.
5.5 Temperature alarm
The audible alarm sounds if the freezer temperature is not cold
enough.
The temperature display and the alarm symbol
Fig. 2 (20)
flash
at the same time.
The cause of the temperature being too high may be:
-warm fresh food was placed inside
-too much warm ambient air flowed in when rearranging and
removing food
-power failure for some time
-the appliance is faulty
The audible alarm is automatically silenced, the alarm symbol
Fig. 2 (20)
goes out and the temperature display stops flashing
when the temperature is sufficiently cold again.
If the alarm status persists: (see Malfunction).
Control
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SBSes7273 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SBSes7273 in the language / languages: English as an attachment in your email.

The manual is 0.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SBSes7273

Liebherr SBSes7273 User Manual - German - 16 pages

Liebherr SBSes7273 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info