715385

Liebherr SBSes 8496 Manual

17
Zoom out
Zoom in
Previous page
1/30
Next page
- The water must be connected to the appliance via a cold
water pipe that can withstand the operating pressure and
complies with hygiene standards.
Use the stainless steel hose supplied (length 1.5 m). Do not
reuse old hoses. A 3 m hose is available as an optional
extra. This must be professionally installed.
A filter with a seal is located in the hose connector.
- A stopcock must be provided between the hose line and the
domestic water connection to cut off the water supply if
necessary.
- The stopcock must be located outside the back of the appli-
ance and be within easy reach so that the appliance can be
inserted as deeply as possible and the stopcock can be
turned off quickly. Stick to the clearances.
- All devices and equipment used to supply water must
comply with the regulations in force in the respective
country.
- Do not damage or kink the water supply line during installa-
tion.
Fig. 45
The solenoid is located at the bottom on the back of the appli-
ance. It has a metric R3/4 connecting thread.
For specialist staff:
Connecting the stainless steel hose: The back of the appliance
must be accessible.
WARNING
Broken auxiliary tool
Fig. 45 (6)
.
Cuts.
u
Only use an auxiliary tool
Fig. 45 (6)
at room temperature.
Connecting the hose to the appliance:
u
Remove the cover
Fig. 45 (2)
.
u
Easy to fit: Place the straight end of the hose
Fig. 45 (8)
to
the left on the floor.
u
Slide the nut
Fig. 45 (5)
over the angled end of the hose
Fig. 45 (4)
up to the end and secure.
u
Moisten
Fig. 45 (3)
the seal and push onto the nut
Fig. 45 (5)
.
w
The seal
Fig. 45 (3)
lies flat and is easily retained.
Fig. 46
NOTICE
Damaged solenoid thread pitch.
The solenoid leaks: Water may leak out.
u
Position the nut
Fig. 46 (1)
carefully and screw it directly
onto the thread with two fingers until it is seated securely.
u
Tighten the nut
Fig. 46 (1)
clockwise with the auxiliary tool
Fig. 45 (6)
until maximum torque is reached and the auxiliary
tool
Fig. 45 (6)
overtightens.
Connecting the hose to the stopcock:
u
Screw the nut
Fig. 45 (8)
onto the stopcock
Fig. 45 (9)
.
u
Tighten the nut
Fig. 45 (8)
clockwise with the auxiliary tool
Fig. 45 (6)
until maximum torque is reached and the auxiliary
tool
Fig. 45 (6)
overtightens.
u
Turn the water supply stopcock
Fig. 45 (9)
on and check the
whole water system for leaks.
u
Flushing the IceMaker: Turning the IceMaker on chapter
(see 5.4.10.2 Switch the IceMaker on.) .
u
Hook the clip
Fig. 45 (7)
into the auxiliary tool
Fig. 45 (6)
and
fix it to the stainless steel pipe to store it.
4.5 Insertion into a row of kitchen units
Fig. 47
Putting into operation
* Depending on model and options 17
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SBSes 8496 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SBSes 8496 in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SBSes 8496

Liebherr SBSes 8496 Installation Guide - German - 6 pages

Liebherr SBSes 8496 User Manual - German - 30 pages

Liebherr SBSes 8496 User Manual - Dutch - 62 pages

Liebherr SBSes 8496 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info