715385
13
Zoom out
Zoom in
Previous page
1/30
Next page
u
Undo the screws with a T25 screwdriver and remove the
bearing bracket
Fig. 30 (3)
Fig. 31
u
Remove the cover and fix it on the other side.
Fig. 31 (1)
u
Place the bearing bracket on the other side and screw in
with the aid of a T25 screwdriver. Start with screw 2 at the
bottom in the middle.
Fig. 31 (2)
u
Screw in screws 3 and 4.
Fig. 31 (3, 4)
u
Rotate the soft stop connection 180°. Screw in with a T25
screwdriver on the other side of the bearing bracket.
Fig. 31 (5)
u
Insert the bearing pin completely. Make sure that the catch
mechanism is pointing to the rear.
Fig. 31 (6)
4.3.9 Moving the door bearing parts to the
other side
Top door
Fig. 32
u
Underside of door faces upwards: Turn the door.
u
Pull out the guide bush: Press the tab with a slotted screw-
driver and, at the same time, insert the slotted screwdriver
under the guide bush.
Fig. 32 (1, 2)
u
Slide the guide bush included in the scope of supply to the
other side of the housing.
Fig. 32 (3)
u
Upper side of door faces upwards: Turn the door.
4.3.10 Moving the handles to the other side
Fig. 33
u
Pull off the cover.
Fig. 33 (1)
u
Remove the screws with the T15 screwdriver.
Fig. 33 (2)
u
Remove the handle.
Fig. 33 (3)
u
Carefully lift up the side plugs with a slotted screwdriver and
pull them out.
Fig. 33 (4)
u
Insert the plugs again on the other side.
Fig. 33 (5)
Putting into operation
* Depending on model and options 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SBSes 8496 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SBSes 8496 in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SBSes 8496

Liebherr SBSes 8496 Installation Guide - German - 6 pages

Liebherr SBSes 8496 User Manual - German - 30 pages

Liebherr SBSes 8496 User Manual - Dutch - 62 pages

Liebherr SBSes 8496 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info