804841
11
Zoom out
Zoom in
Previous page
1/14
Next page
Defect Cause Remedy
Appliance does not
work.
The appliance is not switched on. uSwitching on the appliance.
The power plug is not properly
inserted in the wall socket.
uCheck power plug.
The fuse of the wall socket is not in
order.
uCheck fuse.
The compressor
runs for a long
time.
The compressor switches to a
low speed when little cold is
needed. Although the running time
is increased as a result, energy is
saved.
uThis is normal in energy-saving models.
A LED on the
bottom rear of
the appliance (at
the compressor)
flashes regularly
every 15 seconds*.
The inverter is equipped with a
diagnostic LED.
uThe flashing is normal.
Excessive noise. Due to the various speed steps,
speed-regulated* compressors can
generate different running noises.
uThe sound is normal.
A bubbling and
gurgling noise.
This noise comes from the refrig‐
erant flowing in the refrigeration
circuit.
uThe sound is normal.
A quiet clicking
noise.
The noise is produced whenever
the refrigeration unit (motor) auto‐
matically switches on or off.
uThe sound is normal.
A hum. It is briefly
a little louder
when the refrig‐
eration unit (the
motor) switches
on.
The refrigeration increases auto‐
matically when fresh food has just
been placed in the appliance or the
door has been left open for a while.
uThe sound is normal.
The ambient temperature is too
high.
uSolution: (see 1.2 Appliance range of use)
Vibration noises The appliance is not standing
firmly on the floor. As a result
objects and adjacent units start
to vibrate when the refrigerator is
running.
uAlign the appliance using the adjustable feet.
uKeep bottles and jars apart.
The outer surfaces
of the appliance
are warm*.
The heat of the refrigeration circuit
is used to prevent condensate from
forming.
uThis is normal.
The temperature is
not cold enough.
The door of the appliance is not
properly closed.
uClose the door of the appliance.
Insufficient ventilation. uKeep ventilation grille clear, and clean it.
The ambient temperature is too
high.
uSolution: (see 1.2 Appliance range of use) .
The appliance was opened too
frequently or for too long.
uWait to see whether the appliance reaches the required
temperature by itself. If not, please contact the after
sales service (see 6 Maintenance) .
The appliance is too close to a
source of heat (stove, heater etc).
uChange the position of the appliance or the source of
heat.
The internal light
does not come on.
The appliance is not switched on. uSwitch the appliance on.
Malfunctions
* Depending on model and options 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr K2340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr K2340 in the language / languages: English as an attachment in your email.

The manual is 1.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr K2340

Liebherr K2340 User Manual - German - 14 pages

Liebherr K2340 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info