597453

Liebherr K 2814 Manual

6
Zoom out
Zoom in
Previous page
1/14
Next page
If the appliance is installed in a very damp environment,
condensate may form on the outside of the appliance.
u
Always see to good ventilation at the installation site.
4.3 Changing over the door hinges
You can change over the door hinges if necessary.
Ensure that the following tools are to hand:
q
Torx 25
q
Torx 15
q
Screwdriver
q
If necessary, cordless screwdriver
q
Second person for fitting work, if needed
4.3.1 Removing the door
Note
u
Remove any food from the door racks before removing the
door, so that no food falls out.
Fig. 5
u
Remove the spacer
Fig. 5 (13)
from under the left-hand side
of the door.
Fig. 6
u
Pull the cover
Fig. 6 (1)
forwards and upwards.
u
Lift off the cover
Fig. 6 (2)
.
CAUTION
Risk of injury if the door tips!
u
Take good hold of the door.
u
Set down the door carefully.
u
Unscrew top bearing block
Fig. 6 (3)
(2x Torx® 25)
Fig. 6 (4)
and lift off in upward direction.
u
Lift out the door and set aside.
4.3.2 Change freezer compartment door
Fig. 7
u
Fold away cover of turn hinge
Fig. 7 (15)
.
u
Unscrew turn hinge
Fig. 7 (15)
together with compartment
door.
u
Unscrew closing element
Fig. 7 (16)
.
u
Close the vacated holes with the accompanying stoppers
Fig. 7 (17)
.
Fig. 8
u
Fit closing element
Fig. 8 (16)
.
u
Fit compartment door at the top.
u
Fit turn hinge
Fig. 8 (15)
and fold the cover.
4.3.3 Relocating the bearing components
Fig. 9
u
Unscrew fastening screws
Fig. 9 (21)
.
u
Remove the lower bearing block
Fig. 9 (23)
, complete with
bearing bolt
Fig. 9 (24)
, washer
Fig. 9 (26)
and adjustable
foot
Fig. 9 (22)
.
u
Unscrew the bearing bolt
Fig. 9 (24)
, complete with washer
Fig. 9 (26)
, re-locate it into the mounting hole on the oppo-
site side of the bearing block and tighten again.
u
Carefully remove the cover plate
Fig. 9 (25)
and re-locate it
to the other side.
u
Screw on the lower bearing block
Fig. 9 (23)
, complete with
bearing bolt
Fig. 9 (24)
, washer
Fig. 9 (26)
and adjustable
foot
Fig. 9 (22)
to the new hinge side, with the help of a cord-
less screwdriver if necessary, and tighten (with 4 Nm)
once again.
4.3.4 Transferring the handle
u
Lift the stopper
Fig. 10 (30)
out of the door bearing bush and
transfer it.
Fig. 10
Putting into operation
6 * Depending on model and options
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr K 2814 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr K 2814 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr K 2814

Liebherr K 2814 User Manual - German - 14 pages

Liebherr K 2814 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info