805601

Liebherr IXCC 5165 Manual

45
Zoom out
Zoom in
Previous page
1/64
Next page
Fig. 18
uComplete the steps (see Fig. 18) .
wThe IceMaker is activated with MaxIce.
If you have activated MaxIce and would like to change to the
IceMaker:
uSwipe left or right until corresponding function is
displayed.
Fig. 19
uComplete the steps (see Fig. 19) .
wIceMaker is activated.
wMaxIce is deactivated.
Deactivating the IceMaker / MaxIce
uSwipe left or right until corresponding function is
displayed.
Fig. 20 Example illustration of the active IceMaker function
uComplete the steps (see Fig. 20) .
-or-
uDeactivate with the SmartDevice app.
wIceMaker and MaxIce are deactivated.
wIf ice cubes are currently being made, the system
completes the process.
wThe IceMaker goes off automatically.
Ice cubes*
Set the ice cube size.*
Choose the setting*
uSet the size in the Customer menu (see 6.2 Control
concept) .
TubeClean*
This setting cleans the IceMaker pipes.*
Ensure that the following conditions are met:*
qIceMaker cleaning is ready (see 8.6.6 Cleaning the
IceMaker*) .
Activating the setting*
uActivate the setting in the Customer menu
(see 6.2 Control concept) .
wThe rinse process is ready (max. 60 min.): Symbol flashes.
wWater pipes are rinsed: Symbol flashes.
wRinsing process is complete: Function turns off automati‐
cally.
CleaningMode*
Use this setting to easily clean the appliance.*
This setting refers to the fridge section Fig. 1 (A).*
Use:*
-Clean the fridge section by hand.
-Clean the InfinitySpring.*
What happens on the appliance when this setting is on:*
-The display permanently shows: CleaningMode.
-The fridge section is switched off.
-The internal light is on.
-Reminders and warnings are not shown. There is no
acoustic signal.
-The InfinitySpring is out of use.*
Activating/deactivating settings*
uActivating/deactivating the setting (see 6.2 Control
concept) .
wOn: fridge section is off. Light stays on.
wOff: preset temperature is restored.
After 60 min the setting turns off automatically. The appli‐
ance then continues running in normal mode.
Display brightness
Set the brightness level of the display.
You can set the following brightness levels:
-40%
-60%
-80%
-100%
Choose the setting
uSet the level (see 6.2 Control concept) .
Door alarm
Set the time before the door alarm (see Close the door)
sounds.
The options are as follows:
-1 min
-2 min
-3 min
-Off
Controls
* Depending on model and options 15
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr IXCC 5165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr IXCC 5165 in the language / languages: English as an attachment in your email.

The manual is 11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info