805601

Liebherr IXCC 5165 Manual

44
Zoom out
Zoom in
Previous page
1/64
Next page
Temperature zone Recom‐
mended
setting
Temperature
when Ener‐
gySaver activated
Fridge compart‐
ment
5 °C 7 °C
Freezer compart‐
ment
-18 °C -16 °C
Temperatures
Activating EnergySaver
uSwipe left or right until corresponding function is
displayed.
Fig. 14
uComplete the steps (see Fig. 14) .
wEnergy-saving mode is activated.
Deactivating EnergySaver
uSwipe left or right until corresponding function is
displayed.
Fig. 15
uComplete the steps (see Fig. 15) .
wEnergy-saving mode is deactivated.
HydroBreeze*
HydroBreeze creates a fine mist in the drawer every 90
minutes for 4 seconds when the door is closed. This func‐
tion is also activated when you open the door. The function
is not activated when the appliance is delivered.
Use:
-For storing loose salad, vegetables and fruit with a high
moisture content.
Choose from these options:
•1: Duration of function while opening door 4 s
•2: Duration of function while opening door 6 s
•3: Duration of function while opening door 8 s
•Off: HydroBreeze is off.
Activating/deactivating the function
uActivating/deactivating (see 6.2 Control concept) .
-or-
uActivating/deactivating in the Liebherr SmartDevice-
App.*
IceMaker / MaxIce*
You can activate or deactivate ice cube production with the
IceMaker function. Use the MaxIce function to increase the
number of ice cubes in the IceMaker.
More information on the number
of ice cubes:
(see 9.1 Technical
specifications)
More information on the size of
the ice cubes:
(see Ice cubes*)
More information on cleaning the
lines of the IceMaker:
(see TubeClean*)
Activating IceMaker
Make sure that the following requirements are fulfilled:
qThe water supply is established at the fixed water
connection. See installation instructions.*
qIceMaker is put into operation. (see 7.13 IceMaker*)
uSwipe left or right until corresponding function is
displayed.
Fig. 16
uComplete the steps (see Fig. 16) .
-or-
uActivate with the SmartDevice app.
wIceMaker is activated. It can take up to 24 hours for the
IceMaker to produce the first ice cubes.
Activating the IceMaker with MaxIce
If you have not activated the IceMaker function before,
make sure that the following requirements are met:
qThe water supply is established at the fixed water
connection. See installation instructions.*
qIceMaker is put into operation. (see 7.13 IceMaker*)
uSwipe left or right until corresponding function is
displayed.
Fig. 17
uComplete the steps (see Fig. 17) .
-or-
uActivate with the SmartDevice app.
wThe IceMaker is activated with MaxIce.
Changing between the IceMaker and MaxIce
If you have activated the IceMaker and would like to change
to MaxIce:
uSwipe left or right until corresponding function is
displayed.
Controls
14 * Depending on model and options
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr IXCC 5165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr IXCC 5165 in the language / languages: English as an attachment in your email.

The manual is 11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info