805280

Liebherr GP1386 Manual

11
Zoom out
Zoom in
Previous page
1/14
Next page
WARNING
Unprofessional repair!
Injuries.
uHave any repairs and action - not expressly specified -
on the appliance and mains cable carried out by service
personnel only. (see 6 Maintenance)
uA damaged mains cable may only be replaced by the
manufacturer, the manufacturer’s Customer Service or a
similarly qualified person.
uIn the case of appliances with an IEC connector, the
change may be made by the customer.
uRead the appliance
designation Fig. 7 (1),
service No. Fig. 7 (2)
and serial No.
Fig. 7 (3) off the
model plate located
inside the appliance
on the left-hand
side.
Fig. 7
uNotify the customer service, specifying the fault, appli‐
ance designation Fig. 7 (1), service No. Fig. 7 (2) and serial
No. Fig. 7 (3).
wThis will help us to provide you with a faster and more
accurate service.
uKeep the appliance closed until the customer service
arrives.
wThe food will stay cool longer.
uPull out the mains plug (not by pulling the connecting
cable) or switch off the fuse.
7 Malfunctions
Your appliance is designed and manufactured for a long
life span and reliable operation. If a malfunction nonethe‐
less occurs during operation, check whether it is due to a
handling error. In this case you will have to be charged for
the costs incurred, even during the warranty period. You
may be able to rectify the following faults yourself:
Defect Cause Remedy
Appliance does not
work.
→ The appliance is not switched on. uSwitching on the appliance.
→The power plug is not properly
inserted in the wall socket.
uCheck power plug.
→ The fuse of the wall socket is not in
order.
uCheck fuse.
The compressor
runs for a long
time.
→The compressor switches to a
low speed when little cold is
needed. Although the running time
is increased as a result, energy is
saved.
uThis is normal in energy-saving models.
→ SuperFrost is activated. uThe compressor runs for longer in order to rapidly cool
the food. This is normal.
A LED on the
bottom rear of
the appliance (at
the compressor)
flashes regularly
every 15 seconds*.
→The inverter is equipped with a
diagnostic LED.
uThe flashing is normal.
Excessive noise. →Due to the various speed steps,
speed-regulated* compressors can
generate different running noises.
uThe sound is normal.
A bubbling and
gurgling noise.
→This noise comes from the refrig‐
erant flowing in the refrigeration
circuit.
uThe sound is normal.
A quiet clicking
noise.
→The noise is produced whenever
the refrigeration unit (motor) auto‐
matically switches on or off.
uThe sound is normal.
A hum. It is briefly
a little louder
when the refrig‐
eration unit (the
motor) switches
on.
→The refrigeration increases auto‐
matically when the SuperFrost,
function is activated, fresh food
has just been placed in the appli‐
ance or the door has been left open
for a while.
uThe sound is normal.
→The ambient temperature is too
high.
uSolution: (see 1.2 Appliance range of use)
Malfunctions
* Depending on model and options 11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr GP1386 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr GP1386 in the language / languages: English as an attachment in your email.

The manual is 1.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr GP1386

Liebherr GP1386 User Manual - German - 14 pages

Liebherr GP1386 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info