805280
10
Zoom out
Zoom in
Previous page
1/14
Next page
5.12.1 Using freezer packs
uPut the fully frozen freezer
packs on the frozen food in
the top front section of the
freezer compartment.
*
6 Maintenance
6.1 Manual defrosting
After a long period of operation, a layer of frost or ice can
build up inside the appliance.
The layer of frost or ice builds up faster if the appliance
is opened often or if the food is warm when placed inside.
However, a thick layer of ice will increase the appliance‘s
energy consumption. You should therefore defrost the appli‐
ance regularly.
Remove ice from inside surface at top of appliance:
A layer of ice forms inside at the centre of the top of the
device. This ice forms as a result of physical properties.
uRegularly remove the ice with a scraper tool. The appli‐
ance does not need to be be thawed for that reason.
Thawing process:
WARNING
Improper defrosting of the appliance!
Injuries and damage.
uDo not use mechanical equipment or other methods to
speed up the defrosting process other than those recom‐
mended by the manufacturer.
uDo not use electrical heating or steam-cleaning appli‐
ances, naked flames or defroster sprays to defrost.
uDo not use sharp objects to remove ice.
uSwitch on SuperFrost one day before defrosting.
wThe frozen goods are provided with a “cold reserve”.
uSwitch off the appliance.
wThe temperature display goes out.
wIf the temperature display does not go out, the child lock
function (see 5.2 Child proofing) is active.
uPull out the power plug or switch off the fuse.
uPlace cold storage accumulators on top of the frozen
food.
uIf possible, put the frozen goods in the freezer drawer,
wrapped in newspaper or a blanket, and store in a cool
place.
uPlace a pan with hot, not boiling
water on a middle shelf.
wDefrosting is speeded up.
uLeave the door of the appliance open while defrosting.
uRemove detached pieces of ice.
uIf necessary, pick up defrost water several times, using a
sponge or cloth.
uClean the appliance (see 6.2 Cleaning the appliance) .
6.2 Cleaning the appliance
Clean the appliance regularly.
WARNING
Risk of injury and damage as a result of hot steam!
Hot steam can lead to burns and can damage the surfaces.
uDo not use any steam cleaners!
NOTICE
Incorrect cleaning damages the appliance!
uDo not use cleaning agents in concentrated form.
uDo not use any scouring or abrasive sponges or steel
wool.
uDo not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
uDo not use chemical solvents.
uDo not damage or remove the type plate on the inside of
the appliance. It is important for the customer service.
uDo not pull off, bend or damage cables or other compo‐
nents.
uDo not allow any cleaning water to enter the drain
channel, ventilation grille or electrical parts.
uPlease use soft cleaning cloths and a universal pH-
neutral cleaning agent.
uPlease use cleaning and care products suitable for
contact with foodstuffs in the appliance interior.
uEmpty appliance.
uPull out the power plug.
uClean the vent grille regularly.
wDust deposits increase energy consumption.
uClean plastic outer and inner surfaces with lukewarm
water and a little washing-up liquid.
uOnly use a soft clean cloth to wipe side walls with a
paint finish. In the case of heavy soiling, use lukewarm
water with neutral cleaning agent.*
uUse only a soft clean cloth to wipe door surfaces with a
paint finish. In the case of heavy soiling, use a little water
or neutral cleaning agent. A micro-fibre cloth can be used
optionally.*
Do not apply stainless steel cleaning agent to glass or
plastic surfaces to prevent them from being scratched.
Darker areas at the beginning and quite an intensive colour
of the stainless steel surface are normal.*
uWhen soiled, clean stainless steel outer surfaces with
a commercially available stainless steel cleaning agent.
Then apply the enclosed stainless steel care product
evenly in the direction of polishing.*
uClean drawers by hand with lukewarm water and a little
washing up liquid.
uClean other items of equipment by hand with lukewarm
water and a little washing-up liquid.
After cleaning:
uWipe dry the appliance and items of equipment.
uConnect the appliance and switch it on again.
uSwitch on SuperFrost (see 5.7 SuperFrost) .
When the temperature is sufficiently cold:
uPut the food back inside.
6.3 Customer service
First check whether you can rectify the fault yourself
(see 7 Malfunctions) . If you cannot rectify the problem,
contact Customer Services. You can find the address in the
enclosed Customer Service Directory.
Maintenance
10 * Depending on model and options
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr GP1386 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr GP1386 in the language / languages: English as an attachment in your email.

The manual is 1.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr GP1386

Liebherr GP1386 User Manual - German - 14 pages

Liebherr GP1386 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info