710287

Liebherr GP 2033-20 Manual

8
Zoom out
Zoom in
Previous page
1/14
Next page
5 Control
5.1 Brightness of the temperature
display
You can adjust the brightness of the temperature display to the
light conditions of the room in which the appliance is installed.
5.1.1 Adjusting the brightness
The background lighting can either be turned off or set to one
of 5 levels. The factory setting is that the background lighting is
turned off.
u
To activate the setting mode: Press the SuperFrost button
Fig. 3 (2)
for about 5 seconds.
w
The menu symbol
Fig. 3 (9)
shines and the child lock symbol
Fig. 3 (8)
flashes.
u
Press the setting button
Fig. 3 (6)
to select the brightness
function.
w
The child lock symbol
Fig. 3 (8)
turns off and the brightness
symbol
Fig. 3 (3)
flashes.
u
To confirm: Briefly press the SuperFrost button
Fig. 3 (2)
.
w
The brightness symbol
Fig. 3 (3)
shines.
u
Using the setting button
Fig. 3 (6)
, select either "off" or the
brightness wanted. The more display fields of the tempera-
ture display that light up, the brighter it is. If no field is lit up, it
means "off".
u
To confirm: Press the SuperFrost button
Fig. 3 (2)
.
w
The brightness symbol
Fig. 3 (3)
flashes.
w
The brightness is adjusted to the new value.
u
To deactivate the setting mode: Press the On/Off button
Fig. 3 (1)
.
-or-
u
Wait for 5 minutes.
w
The brightness symbol
Fig. 3 (3)
and the menu symbol
Fig. 3 (9)
go out.
w
The temperature is indicated again in the temperature
display.
5.2 Child proofing
The child-proofing function enables you to make
sure that the appliance is not inadvertently switched
off by playing children.
5.2.1 To activate child lock
u
To activate the setting mode: Press the SuperFrost button
Fig. 3 (2)
for about 5 seconds.
w
The menu symbol
Fig. 3 (9)
shines and the child lock symbol
Fig. 3 (8)
flashes.
u
Briefly press the SuperFrost button
Fig. 3 (2)
to select the
child lock function.
w
The child lock symbol
Fig. 3 (8)
shines. The
-15 °C and -21 °C LEDs shine in the temperature
display.
u
Briefly press the SuperFrost button
Fig. 3 (2)
to activate the
child lock.
w
The child lock symbol
Fig. 3 (8)
flashes. The -15 °C and
-21 °C LEDs go out.
u
To deactivate the setting mode: Press the On/Off button
Fig. 3 (1)
.
-or-
u
Wait for 5 minutes.
w
The menu symbol
Fig. 3 (9)
goes out and the temperature is
displayed again in the temperature display. The child lock
symbol
Fig. 3 (8)
shines.
5.2.2 To deactivate child lock
u
To activate the setting mode: Press the SuperFrost button
Fig. 3 (2)
for about 5 seconds.
w
The menu symbol
Fig. 3 (9)
shines and the child lock symbol
Fig. 3 (8)
flashes.
u
Briefly press the SuperFrost button
Fig. 3 (2)
to select the
child lock function.
w
The child lock symbol
Fig. 3 (8)
shines. The
-18 °C LED shines in the temperature display.
u
Briefly press the SuperFrost button
Fig. 3 (2)
to deactivate
the child lock.
w
The child lock symbol
Fig. 3 (8)
flashes.
u
To deactivate the setting mode: Press the On/Off button
Fig. 3 (1)
.
-or-
u
Wait for 5 minutes.
w
The menu symbol
Fig. 3 (9)
goes out and the temperature is
displayed again in the temperature display. The child lock
symbol
Fig. 3 (8)
no longer shines.
5.3 Temperature alarm
The audible alarm sounds if the freezer temperature
is not cold enough.
The temperature display and the alarm symbol
Fig. 3 (10)
flash at the same time.
The cause of the temperature being too high may be:
-
warm fresh food was placed inside
-
too much warm ambient air flowed in when rearranging and
removing food
-
Prolonged power outage
-
the appliance is faulty
The audible alarm is automatically silenced, the alarm symbol
Fig. 3 (10)
goes out and the temperature display stops flashing
when the temperature is sufficiently cold again.
If the alarm status persists: (see 7 Malfunctions) .
Note
Food may be spoilt if the temperature is not cold enough.
u
Check the quality of the food. Do not consume spoiled food.
5.3.1 Muting the temperature alarm
The audible alarm can be muted. When the temperature is
sufficiently cold again, the alarm function is active again.
u
Press alarm button
Fig. 3 (7)
.
w
The audible alarm is silenced.
5.4 Freezing food
The rating plate indicates the maximum quantity of fresh food
you can freeze within 24 hours (see 1 Appliance at a glance)
under “Freezing capacity ... kg/24h”.
Each drawer can hold a max. of 25 kg of frozen food.
The shelves can each be loaded with 35 kg of frozen food.
If the door cannot be opened right after having been closed,
due to vacuum, please wait about 2 minutes until pressure
returns to normal.
Control
8 * Depending on model and options
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr GP 2033-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr GP 2033-20 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr GP 2033-20

Liebherr GP 2033-20 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info