805276

Liebherr GN1066 Manual

6
Zoom out
Zoom in
Previous page
1/14
Next page
qDo not install the appliance on your own.
qThe more coolant there is in the appliance, the larger
the room in which the appliance is installed must be. If
the room is too small, any leak may create a flammable
mixture of gas and air. For each 8 g of coolant the instal‐
lation space must be at least 1 m3. Information on the
coolant is on the model plate inside the appliance.
uDetach the connecting cable from the rear of the appli‐
ance, removing the cable holder at the same time
because otherwise there will be vibratory noise!
uRemove all transit supports.
The spacers supplied with some appliances must be used to
achieve the stated energy consumption. These will extend
the depth of the appliance by approx. 35 mm. The appliance
is fully functional if the spacers are not used, but does have
a slightly higher energy consumption.
uIn the case of an appliance with
enclosed wall spacers, mount
the wall spacers on the back
of the appliance at the top left
and right.
uDispose of packaging material (see 4.5 Disposing of
packaging) .
uAlign the appliance so that it
stands firmly and on a level
by applying the accompa‐
nying spanner to the adjust‐
able-height feet (A) and
using a spirit level.
Note
uClean the appliance (see 6.2 Cleaning the appliance) .
If the appliance is installed in a very damp environment,
condensate may form on the outside of the appliance.
uAlways see to good ventilation at the installation site.
4.3 Changing over the door hinges
You can change over the door hinges if necessary.
Make sure that the following tools are at hand:
qTorx® 25
qTorx® 15
qSupplied open-ended wrench
qIf necessary, a second person to assist with installation
CAUTION
Risk of injury if the door tips!
uTake good hold of the door.
uSet down the door carefully.
Fig. 4 On appliances with a door handle
uFollow the sequence of the item numbers in the diagram.
WARNING
Risk of injury due to the door dropping out!
If the bearing parts are not screwed into place firmly
enough, the door may drop out. This may lead to severe
injuries. What is more, the door may not close and therefore
the appliance may fail to cool properly.
uScrew on the bearing brackets/bearing pins tightly (4
Nm).
uCheck all of the screws and retighten if necessary.
4.4 Sliding into the row of units
Fig. 5
(1) Top cupboard (3) Kitchen cabinet
(2) Appliance (4) Wall
x For appliances with supplied wall spacers, add 35 mm
(see 4.2 Installing the appliance) to the dimensions.
The appliance can be built into kitchen units. A top
cupboard Fig. 5 (2) can be added above the appliance in
order to bring the appliance Fig. 5 (1) up to the height of the
fitted kitchen units.
Putting into operation
6 * Depending on model and options
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr GN1066 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr GN1066 in the language / languages: English as an attachment in your email.

The manual is 1.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr GN1066

Liebherr GN1066 User Manual - German - 14 pages

Liebherr GN1066 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info