The temperature gradually rises to near 0 degrees over one day. Display flashes with two horizontal lines. Some ice built up inside. After disconnecting power and leave door open for few hours about just 50cc water accumulated in water collecting box on top of the compressor. Switched the power on, after 5 hours temperature inside the freezer got to -1 degrees, compressor is warm, filter body is cold, the black grill in the back is barely warm. The fan is working, the heater gets hot when switched on in service mode. Sensors of inside temperature and evaporator work and provide readout on display of +7 and -1 accordingly. What could be the reason? Is it the electronic card?
Submitted on 20-6-2024 at 03:51
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Liebherr GN 1066 Premium at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Liebherr GN 1066 Premium in the language / languages: English as an attachment in your email.
The manual is 0,45 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.