Manual Liebherr GN 1066 Premium (page 7 of 12) (English)

561382

Zoom out

Zoom in

1/12

Check the electrical connection.

Plug in the power plug.

4.7 Switching on the appliance

Press the On/Off button

Fig. 3 (1)

The appliance is switched on. The temperature display and

Alarm symbol

Fig. 3 (6)

flash until the temperature is cold

enough.

If “DEMO” is displayed, demo mode is activated. Please

contact the after sales service.

5 Control

5.1 Brightness of the temperature

display

You can adjust the brightness of the temperature display to the

light conditions of the room in which the appliance is installed.

5.1.1 Setting the brightness

The brightness is adjustable between h 0 (minimum bright-

ness) and h 5 (maximum brightness).

Activate setting mode by pressing the SuperFrost button,

Fig. 3 (4)

, for approx. 5 sec.

The Menu symbol is shown on the display,

Fig. 3 (7)

c flashes on the display.

Use the adjustment button,

Fig. 3 (2)

, to select h.

Briefly confirm with the SuperFrost button,

Fig. 3 (4)

The display shows the last set brightness value.

Use the adjustment button,

Fig. 3 (2)

, to set the desired

value from h 0 to h 5.

Briefly confirm the newly set brightness value with the

SuperFrost button

Fig. 3 (4)

h flashes on the display.

The brightness is set.

After making the change, deactivate setting mode: Press the

On/Off button

Fig. 3 (1)

once.

The temperature display shows the temperature again.

If setting mode is already activated but you would like to keep

the old brightness value setting:

Press the On/Off button

Fig. 3 (1)

twice to deactivate setting

mode.

The temperature display shows the temperature again.

5.2 Child proofing

The child-proofing function enables you to make

sure that the appliance is not inadvertently switched

off by playing children.

5.2.1 Setting the child lock

To switch on the function:

Activate setting mode: press the SuperFrost button

Fig. 3 (4)

for approx. 5 seconds.

The Menu symbol

Fig. 3 (7)

is shown on the display.

c flashes on the display.

Briefly confirm with the SuperFrost button,

Fig. 3 (4)

c1 appears in the display.

Briefly confirm with the SuperFrost button,

Fig. 3 (4)

The child lock symbol

Fig. 3 (8)

, lights up on the

display.

c flashes on the display.

The child lock function is switched on.

If setting mode is to be terminated:

Briefly press the On/Off button

Fig. 3 (1)

-or-

Wait for 5 minutes.

The temperature display shows the temperature again.

To switch off the function:

Activate setting mode: press the SuperFrost button

Fig. 3 (4)

for approx. 5 seconds.

The Menu symbol

Fig. 3 (7)

is shown on the display.

c flashes on the display.

Briefly confirm with the SuperFrost button,

Fig. 3 (4)

c0 appears in the display.

Briefly confirm with the SuperFrost button,

Fig. 3 (4)

The child lock symbol

Fig. 3 (8)

goes out.

c flashes on the display.

The child lock function is switched off.

If setting mode is to be terminated:

Briefly press the On/Off button

Fig. 3 (1)

-or-

Wait for 5 minutes.

The temperature display shows the temperature again.

5.3 Door alarm

An audible warning sounds if the door is open for

longer than 60 seconds.

The audible warning stops automatically when the

door is closed.

5.3.1 Muting the door alarm

The audible alarm can be muted when the door is open. The

sound switch-off function is active as long as the door is left

open.

Press alarm button

Fig. 3 (9)

The door alarm is silenced.

5.4 Temperature alarm

The audible alarm sounds if the freezer temperature

is not cold enough.

The temperature display and the alarm symbol

Fig. 3 (6)

flash at the same time.

The cause of the temperature being too high may be:

warm fresh food was placed inside

too much warm ambient air flowed in when rearranging and

removing food

Prolonged power outage

the appliance is faulty

The audible alarm is automatically silenced, the alarm symbol

Fig. 3 (6)

goes out and the temperature display stops flashing

when the temperature is sufficiently cold again.

If the alarm status persists: (see 7 Malfunctions) .

Note

Food may be spoilt if the temperature is not cold enough.

Check the quality of the food. Do not consume spoiled food.

5.4.1 Muting the temperature alarm

The audible alarm can be muted. When the temperature is

sufficiently cold again, the alarm function is active again.

Control

* Depending on model and options 7

The temperature gradually rises to near 0 degrees over one day. Display flashes with two horizontal lines. Some ice built up inside. After disconnecting power and leave door open for few hours about just 50cc water accumulated in water collecting box on top of the compressor. Switched the power on, after 5 hours temperature inside the freezer got to -1 degrees, compressor is warm, filter body is cold, the black grill in the back is barely warm. The fan is working, the heater gets hot when switched on in service mode. Sensors of inside temperature and evaporator work and provide readout on display of +7 and -1 accordingly. What could be the reason? Is it the electronic card? Submitted on 20-6-2024 at 03:51
Reply Report abuse
Freezer has started to leak. What is the problem?
Submitted on 25-1-2021 at 02:00
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr GN 1066 Premium in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr GN 1066 Premium

Liebherr GN 1066 Premium User Manual - Dutch - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Liebherr GN 1066 Premium Manual

Product: