715463
6
Zoom out
Zoom in
Previous page
1/18
Next page
Switching the appliance on and off
You are advised to clean the appliance before switching it on for
the first time (see "Cleaning").
Do not load with frozen food until the temperature shows at least
-18°C. The refrigerator and freezer compartments can be oper-
ated separately.
Switching off: Keep the On/Off icons pressed for approx. 3
seconds.
Temperature display
In normal operation, the following settings will be displayed:
- the average refrigerator temperature and
- the warmest frozen food temperature.
When starting up for the first time or when the
appliance is warm, dashes will appear until
the temperature reaches a level that can be
displayed (below 0°C in the freezer).
The display will flash:
- if you change the temperature or
- if the temperature rises by several degrees, indicating cold
loss, e.g. if you place fresh, "warm" food in the freezer or if you
remove or re-pack frozen food the temperature may rise for a
short time due to warm air flowing into the freez er.
If F1 to F5 appears in the display, the appliance has a fault.
Consult the customer serv ice department indicating the fault
number displayed.
Switching on: Touch the On/Off icons (on left
for refrigerator, on right for freezer) so that the
temperature displays light up or flash.
Setting the temperature
The appliance is pre-set for normal operation. We recommend
temperatures of +5°C in the refrigerator and -18°C in the freezer.
To reduce the temperature: Touch the
Down icon; on left for refrigerator and on
right for freezer.
To increase the temperature: Touch the
Up icon.
- While you are entering the temperature, the set temperature
will flash on the display.
- When you touch the temperature setting icons for the first time,
the most recent setting ("reference setting") is displayed.
- You can change the settings in increments of 1°C by briefly
touching the icons again. If the icons are held, the temperature
setting will change faster.
- Approximately 5 seconds after the last touch, the display will
automatically show the actual freezing or cooling temperature
("actual setting").
- You can change the temperatures
in the refrigerator: between 9°C and 3°C and
in the freezer: between -14°C and -28°C.
Installing the water filter
1. Remove the cover of the filter
socket.
2. Insert the filter and turn it 9
clockwise.
Removing the water filter
Turn the filter 90° anticlockwise
and remove.
22
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr ECBN 6256 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr ECBN 6256 in the language / languages: English as an attachment in your email.

The manual is 2.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr ECBN 6256

Liebherr ECBN 6256 User Manual - German - 12 pages

Liebherr ECBN 6256 Installation Guide - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info