Manual Liebherr CNef 4845 (page 25 of 28) (English)

716871

Zoom out

Zoom in

1/28

uRead off the appliance

name

Fig. 52 (1)

service no.

Fig. 52 (2)

and serial no.

Fig. 52 (3)

from the

model plate. The

model plate can be

found on the inside of

the appliance on the

left.

Fig. 52

Licence agreements:

Licences used can be viewed at ©.

uPress ©.

7 Malfunctions

Your appliance is designed and manufactured for a long life

span and reliable operation. If a malfunction nonetheless

occurs during operation, check whether it is due to a handling

error. In this case you will have to be charged for the costs

incurred, even during the warranty period. You may be able to

rectify the following faults yourself:

Appliance does not work.

→The appliance is not switched on.

uSwitch on the appliance.

→The power plug is not properly inserted in the wall socket.

uCheck power plug.

→The fuse of the wall socket is not in order.

uCheck fuse.

→The appliance plug does not fit the appliance properly.

uCheck the appliance plug.

The compressor runs for a long time.

→The compressor switches to a low speed when little cold is

needed. Although the running time is increased as a result,

energy is saved.

uThis is normal in energy-saving models.

→SuperFrost is activated.

uThe compressor runs for longer in order to rapidly cool the

food. This is normal.

→SuperCool is activated.

uThe compressor runs for longer in order to rapidly cool the

food. This is normal.

Excessive noise.

→Due to the various speed steps, speed-regulated* compres-

sors can generate different running noises.

uThe sound is normal.

A bubbling and gurgling noise.

→This noise comes from the refrigerant flowing in the refriger-

ation circuit.

uThe sound is normal.

A quiet clicking noise.

→The noise is produced whenever the refrigeration unit

(motor) automatically switches on or off.

uThe sound is normal.

A hum. It is briefly a little louder when the refrigeration

unit (the motor) switches on.

→The refrigeration increases automatically when the

SuperFrost, function is activated, fresh food has just been

placed in the appliance or the door has been left open for a

while.

uThe sound is normal.

→The refrigeration increases automatically when the

SuperCool function is activated, fresh food has just been

placed in the appliance or the door has been left open for a

while.

uThe sound is normal.

→The ambient temperature is too high.

uSolution: (see 1.2 Appliance range of use)

A low hum.

→The sound is produced by air flow noise of the fan.

uThe sound is normal.

Vibration noises

→The appliance is not standing firmly on the floor. As a result

objects and adjacent units start to vibrate when the refriger-

ator is running.

uAlign the appliance using the adjustable feet.

uKeep bottles and jars apart.

Hum of the water tank pump.*

→When water is pumped out of the water reservoir, a brief

hum of the pump can be heard.

uThe sound is normal.

The DEMO symbol appears on the screen. In addition

some time elapses.

→DEMO mode is activated.

uOFF Press .

DEMO is displayed in the top right corner of the screen.

→DEMO mode is activated.

uUnplug the appliance.

uPlug the appliance in again.

wThe DEMO symbol appears on the screen. In addition some

time elapses.

uOFF Press .

The outer surfaces of the appliance are warm*.

→The heat of the refrigeration circuit is used to prevent

condensate from forming.

uThis is normal.

The IceMaker cannot be switched on. *

→The appliance and therefore the IceMaker are not

connected.

uConnect the appliance to the mains (see 4 Putting into

operation) .

The IceMaker does not make any ice cubes.*

→The IceMaker is not switched on.

uSwitch on the IceMaker.

→The drawer of the IceMaker is not properly closed.

uClose the drawer properly.

→The water tank is not correctly inserted.

uInsert the water tank.

→There is not enough water in the water tank.

uFill the water tank.

Functions in the IceMaker submenu do not start.*

→Ice cube tray rotates.

uTry again after 1 minute.

The temperature is not cold enough.

→The door of the appliance is not properly closed.

uClose the door of the appliance.

→Insufficient ventilation.

uKeep ventilation grille clear, and clean it.

→The ambient temperature is too high.

uSolution: (see 1.2 Appliance range of use) .

→The appliance was opened too frequently or for too long.

uWait to see whether the appliance reaches the required

temperature by itself. If not, please contact the after sales

service (see 6 Maintenance) .

→Too much fresh food was placed inside without SuperFrost.

uSolution: (see 5.5.5 SuperFrost)

→The temperature is incorrectly set.

uSet the temperature to a colder setting and check after 24

hours.

→The appliance is too close to a source of heat (stove, heater

etc).

Malfunctions

* Depending on model and options 25

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CNef 4845 in the language / languages: English as an attachment in your email.

The manual is 1.63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CNef 4845

Liebherr CNef 4845 User Manual - German - 28 pages

Liebherr CNef 4845 User Manual - Dutch - 30 pages

Liebherr CNef 4845 User Manual - French - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Liebherr CNef 4845 Manual

Product: