Manual Liebherr cbnes 5067 422l (page 9 of 26) (English)

348146

Zoom out

Zoom in

1/26

Fig. 12

Slide the faceplate forwards over the soft stop bracket

Fig. 12 (34)

in the direction of the appliance.

Snap the safety lock

Fig. 12 (32)

into the oblong hole.

The safety lock prevents the hinge from snap-closing.

Using a screwdriver, lift off the cover

Fig. 12 (31)

from the

outside and remove it in an outward direction.

If necessary, tip the appliance backwards with the assis-

tance of a second person.

Press the pin

Fig. 12 (33)

out from underneath.

Press the soft stop bracket

Fig. 12 (34)

towards the door.

Remove the faceplate

Fig. 12 (30)

Unscrew the soft stop unit (2x Torx® 15)

Fig. 12 (35)

Pull the soft stop unit out a little, push it in the direction of the

handle side and swing it out.

Set the soft stop unit aside.

4.3.5 Detaching the lower door

Close the lower door.

For appliances without soft stop mechanism:

Draw the middle bearing pin

Fig. 13 (41)

out of the turn

hinge and lower door.

For appliances with soft stop mechanism:

Draw the middle bearing pin

Fig. 13 (41)

together with the

washer

Fig. 13 (44)

out of the turn hinge and lower door.

For all appliances:

Remove the plastic cap

Fig. 13 (40)

CAUTION

Risk of injury if the door tips!

Take good hold of the door.

Set down the door carefully.

Open the lower door.

Unscrew the middle turn hinge (2x Torx® 25).

Fig. 13 (42)

Lift off the lower door and set it aside.

4.3.6 Transferring the middle bearing elements

Fig. 13

Carefully detach the cover panel

Fig. 13 (43)

Turn the middle turn hinge

Fig. 13 (42)

with thewasher

Fig. 13 (45)

through 180° and screw it firmly into place on

the new hinge side (with 4 Nm).

Turn the cover panel

Fig. 13 (43)

through 180° and snap it

into place again on the new handle side.

4.3.7 Transferring the lower bearing elements*

for appliances without soft stop mechanism

Fig. 14

Lift out the bearing pin

Fig. 14 (52)

together with washer

Fig. 14 (53)

and adjustable-height foot

Fig. 14 (54)

Lift off the stopper

Fig. 14 (51)

Unscrew

Fig. 14 (56)

the turn hinge

Fig. 14 (55)

Unscrew

Fig. 14 (59)

the bearing element

Fig. 14 (58)

transfer it to the opposite location hole of the turn hinge and

screw it firmly into place.

Carefully lift off the cover on the handle side

Fig. 14 (57)

and

transfer it to the opposite side.

Screw the turn hinge

Fig. 14 (55)

firmly into place on the

new hinge side, possibly using a cordless screwdriver (with

4 Nm).

Re-insert the stopper

Fig. 14 (51)

into the other hole.

Re-insert the bearing pin

Fig. 14 (52)

together with the

washer and adjustable-height foot. In so doing, pay attention

that the locating lug points backwards

4.3.8 Transferring the lower bearing elements *

for appliances with soft stop mechanism

Fig. 15

Lift out the bearing pin

Fig. 15 (52)

together with washer

Fig. 15 (45)

and adjustable-height foot

Fig. 15 (54)

Lift out the stopper

Fig. 15 (51)

Putting into operation

* Depending on model and options 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr cbnes 5067 422l in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr cbnes 5067 422l

Liebherr cbnes 5067 422l User Manual - German - 26 pages

Liebherr cbnes 5067 422l User Manual - Dutch - 13 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Liebherr cbnes 5067 422l Manual

Product: