726273

Liebherr BCv 1103 Manual

11
Zoom out
Zoom in
Previous page
1/40
Next page
11
Lighting
LED lighting is installed to illuminate the appliance interior.
CAUTION: The light intensity of the LED light corre-
sponds to laser class 1M:
• When cover is removed, do not look directly at the
light through optical instruments. Sever eye injury
can occur.
• The lighting may only be replaced by the customer
service technician or by competent skilled person-
nel!
• Do not try to change the LED strips yourself!
Defrosting
The refrigerator compartment defrosts automatically. The
water that forms on the rear wall drains into a reservoir at
the back of the appliance and evaporates automatically
through the hot pipe heat.
When operating at the coldest thermostats setting, the
interior wall may ice up. In this case the appliance must be
defrosted manually by:
• Remove the food from the appliance and store in a cool
place.
• Switch o the appliance by pull out the main plug.
• Leave the door of the appliance open while defrosting.
After defrosting, mop up the remaining water and clean
the appliance.
Do not use any mechanical devices or other
articial aids for defrosting other than those
recommended by the manufacturer.
Cleaning
Cleaning the appliance at least twice per year.
Before cleaning always switch o the appliance. Pull out
the mains plug or switch o.
• Clean the inside, equipment and outer walls with luke-
warm water and a little detergent. Do not use abrasive or
acid cleaners or chemical solvents.
• Ensure that no cleaning water penetrates into the electri-
cal components or ventilation grille.
• The dust should be removed from the refrigeration unit
and heat exchanger - metal grid at the back of the appli-
ance once a year.
• Clean the drain hole in the refrigerator compartment with
a thin object, e.g. cotton swab or the like.
• Do not damage or remove the type plate on the inside of
the appliance. It is very important for servicing purposes.
Do not use steam cleaners because of the
risk of injury and damage.
Safety lock
The lock is equipped with a safety mechanism.
Locking the appliance:
1. Insert the key.
2. Push and turn the key 90
o
counterclockwise
.
To unlock the appliance, the same
procedure must be repeated in the same order.
Noise emissions from the appliance
The noise level while the appliance is operating below 50
dB (A) (relative noise level 1pW).
Cooling
This appliance can be used for chilling all types of drinks
and food.
The grid shelves can be moved to
accommodate dierent height
bottles or packages.
High-percentage alcohols should
be tightly sealed and stored upright.
Do not cover the ventilation slots
inside the appliance.
GB
Brightness Control
To adjust the brightness of the LED strips:
• Insert something (coin,
screwdriver etc) into knob
slot.
• Turn clockwise for brighter
illumination.
• Turn anti-clockwise for dim-
mer illumination.
Note: Only applicable for appliance with dimmer
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr BCv 1103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr BCv 1103 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info