619252
24
Zoom out
Zoom in
Previous page
1/32
Next page
24
Troubleshooting Guide
If there is an abnormality in the product, check the following items first before requesting for a service
center or calling the store. A service cost will be charged if the appliance does not have any
malfunctions. Following simple actions in the user manual may solve the problem.
CHECK PLEASE PERFORM THE FOLLOWING ACTIONS
Weak or no suction
and vibration noise.
Check if inlet or dust bin is blocked by any foreign objects or debris that
weaken the suction.
• Separate dust bin from the main body, and check if the filters are dirty.
Cleaner is not
working at all?
Check the switch is turned on.
Check if battery level is low.
Check if the operation procedure is correct according to the instructions
within this manual.
Why does it suddenly
stop?
This product has an inlet motor overheat prevention device, and it may stop
temporarily when the following cases occur.
If it is used when dust and debris in the dust bin is full and filters are
clogged.
– If it is used with the inlet blocked
– If the product is excessively used for a long time
When power switch is accidently touched.
Loud whirring noise
coming from the
cleaner?
It is the sound of the motor’s high speed rotating brush and the punching
action at the tip of the nozzle. This is normal.
If dust bin is not completely assembled, noise may occur.
Assemble dust bin correctly and completely.
Odor comes out of
the cleaner?
It might be that there is some odor coming out of cleaner after purchasing
this unit for 3 months. It is normal if the unit is operated.
Odors can also be caused by old dust in the dust bin and filters that has not
been cleaned for some time. Empty, clean and wash the dust bin and filters
thoroughly before reusing the appliance.
Hot air comes out,
and main body is hot?
The air coming out of the outlet holes is a little hot because it is coming out
after cooling the motor. This is normal.
UV Sterilization
station does not work.
Check if the power cord of Sterilization station is connected into the power
socket.
Check if the main body is placed correctly on the station.
Cleaners can not be
charged.
Check the switch is turned on.
It only vibrates, and
there is no suction.
Because of the suction motor overheat prevention device, this may occur
when 1) dust bin is full, 2) filter or inlet is blocked, or 3) it is used for a long
time. Allow the unit to rest and cool for at least 40 minutes before attempting
to operate again.
– Before using it again, clean the filter and dust bin.
– If the inlet is blocked, please remove the foreign object.
Mains cord is
defective
The defective plug should be replaced by a qualification electrician.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG VH9200 DSW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG VH9200 DSW in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info