Recording
15
Hookup and
Settings
PBC (Version 2.0)
PBC stands for Playback Control and refers to special
menus and navigation features that are available on
some Video CDs.
[ON] Video CDs are played according to the PBC, if
available.
[OFF] Video CDs are played the same way as Audio
CDs.
Initialization
You can reset the unit to its original factory settings
and initialize the HDD.
[Factory Set] If you need to, you can reset the unit
to all its factory settings. Some options cannot be
reset. (Rating, Password, and Area Code)
[HDD format] Initializes the HDD (Hard Disk Drive):
everything recorded on the HDD will be erased.
1. Select [Initialization] option then press B.
2. Press v / V to select the desired option then press
ENTER.
The confirm message will appear.
3. Use b / B to select [Ok] or [Cancel] then press
ENTER.
Language Settings
Display Menu
Select a language for the Setup menu and on-screen
display.
Disc Menu/Audio/Subtitle
[Original]Refers to the original language in which
the disc was recorded.
[Others] To select another language, press number
buttons then ENTER to enter the corresponding
4-digit number according to the language code list
in the reference chapter (see page 36). If you enter
the wrong language code, press b.
[OFF](for Disc Subtitle) : Turn off Subtitle.
Audio Settings
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to [ON] for
this effect.
Vocal
Set Vocal to [ON] only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
HD AV Sync
When using Digital TV;
Sometimes AV signal could not be transmitted
simultaneously because of later transmission of video
signal compared to audio signal.
Because it takes some time to convert analog video
signal to digital one in the Digital TV.
And it means that you may not enjoy picture on the
screen and sound from speaker at the same time
even though it is one scene.
In the HD AV Sync menu, you could adjust delay time
to audio signal for simultaneous AV signal
transmission
Delay time could be set up with 10m sec. unit.
(0 ~ 300msec)
Delay time is different with each TV Brand. So you
need to adjust optimal delay time complying with
your TV.
2.1 Speaker Setup
Make the following settings for the built-in 2.1 channel
surround decoder.
1. Select [2.1 Speaker Setup] option then press B.
2. Press B to select a speaker that you want to
adjust.
(L: Left speaker/R: Right speaker/W: Active subwoofer)
3. Press v / V to adjust the output level of the
selected speaker.
4. Press ENTER to store the setting.
