495703
124
Zoom out
Zoom in
Previous page
1/132
Next page
On screen messages
124
On screen messages
Message Meaning / Action
All tuning data will be erased
[Shipping Condition] will erase all tuning data (p. 67)
Are you sure ?
Confirm correct operation.
Are you sure you want to
delete this timer ?
Press OK to delete timer.
Press RETURN to return.
Confirm correct operation.
Bad signal
The signal is weak. Check the aerial is plugged in properly. It may
be necessary to have an aerial / dish installer check the signal and
aerial / dish alignment.
Reset channels. (p. 52, 53)
Child Lock is active!
Press OK to enter PIN.
The selected channel is locked in Child Lock (p. 64). You must enter
the PIN number before the channel will be displayed.
External (USB-HDD / SD
Card) Recording Due to Start
This message will appear 2 minutes before timer programming
event for external, USB HDD or SD Card recording due to start.
Faulty dish
The satellite cable might be short-circuited or there might be
connection problems of the cable. Check the cable and connection
and then turn the TV Off with the Mains power On / Off switch, and
turn it On again.
If the message still persists, it may be necessary to consult a dish
installer for checking the dish and cable.
Feature not available.
It is not possible to record from COMPONENT or HDMI. Connect
the recorder to the TV using a fully wired SCART cable for recording
from the TV tuner.
Confirm Q-Link or VIERA Link settings (p. 102 - 105)
Feature not available.
Press OK to view how it works.
The selected feature on VIERA TOOLS is not available. Press the
OK button to view the demonstration to explain how to use it.
Found new software
version
∗∗∗
.
Press OK to start update
(may take over 40 mins) or
press EXIT to ignore and
you can update when TV is
in standby
There is a new software available.
Invalid operation - Please
check settings and
connections.
Check the Q-Link or VIERA Link connection and setting
(p. 102 - 105)
Invalid system time. Please
exit !
Cannot get the time information and cannot edit Timer Programming
screen. Check the connection of the RF cable.
Invalid system time, Timer
Programming will not work.
Please press TV button on
remote control and check
time display on Banner
Cannot get the time information. If there is no time displayed on the
Information banner, check the connection of the RF cable.
Max. number of timers
already set !
The maximum number of timer programming events is 15.
New channels found!
Press OK to update
channel list.
Press EXIT to ignore.
There may be new channels available.
This message will appear each time a change is made by the
broadcasters. This message can be deactivated by setting [New
Channel Message] to Off in [DVB Tuning Menu].
Selecting OK will perform [Update Channel List].
No channel found.
Please check aerial or
local signal availability.
Press OK to start Auto Setup.
Follow the on screen instructions.
Please also refer to p. 121.
If channels are still not found, consult your local Panasonic dealer.
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG 42PM4700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG 42PM4700 in the language / languages: English as an attachment in your email.

The manual is 7,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LG 42PM4700

LG 42PM4700 User Manual - English - 195 pages

LG 42PM4700 User Manual - English - 668 pages

LG 42PM4700 User Manual - Dutch - 188 pages

LG 42PM4700 User Manual - Dutch - 668 pages

LG 42PM4700 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info