691798
23
Zoom out
Zoom in
Previous page
1/204
Next page
Notes:
You can set the printer to receive faxes automatically (set Auto Answer to On) or manually (set Auto
Answer to O).
If you want to receive faxes automatically, then set the printer to pick up on a
specified
number of rings.
Setup 2: Printer is sharing the line with an answering machine
Note: If you subscribe to a distinctive ring service, then make sure that you set the correct ring pattern for
the printer. Otherwise, the printer does not receive faxes even if you have set it to receive faxes
automatically.
Connected to dierent wall jacks
1 Connect one end of the telephone cable to the line port of the printer.
2 Connect the other end of the cable to an active analog wall jack.
Notes:
If you have only one telephone number on your line, then set the printer to receive faxes automatically.
Set the printer to pick up calls two rings after the answering machine. For example, if the answering
machine picks up calls after four rings, then set the printer Rings to Answer setting to 6.
Set up, install, and configure 23
23


Need help? Post your question in this forum.

Forumrules
1

Forum

lexmark-mc3224

Reset search

  • how do i change the language from manderin to english
    Submitted on 17-8-2022 at 17:32

    Reply Report abuse
  • I have an MC3224 printer attached to a DELL laptop with Windows 10 installed. I'm trying to set up to scan to the computer. All I can find is that I need an IP # for the printer, which I do not have or at least cannot find. What can I do to make this thing operate ? Submitted on 25-5-2022 at 00:33

    Reply Report abuse
  • How do I disable the power saver setting to prevent hibernation?
    Submitted on 24-1-2022 at 19:13

    Reply Report abuse
  • My MC3224 displays a paper jam fault. There is no jam, but the printer will not reset the fault. Nothing I have done helps. Is there a way to reset the fault? Submitted on 14-10-2021 at 14:15

    Reply Report abuse
  • Can you go back and open the setup wizard to make changes? Submitted on 10-4-2021 at 02:02

    Reply Report abuse
  • can you go back and access set up wizard to make changes Submitted on 10-4-2021 at 02:01

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark MC3224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark MC3224 in the language / languages: English as an attachment in your email.

The manual is 12,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark MC3224

Lexmark MC3224 User Manual - German - 201 pages

Lexmark MC3224 User Manual - Dutch - 197 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info