Manual Lexmark MC3224 (page 21 of 204) (English)

691798

21

Zoom out

Zoom in

Previous page

1/204

Next page

Setting up the printer to fax

Setting up the fax function

Notes:

• Some connection methods are applicable only in some countries or regions.

• If the fax function is enabled and not fully set up, then the indicator light may blink red.

Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch cables or the printer

in the area shown while actively sending or receiving a fax.

Note: If you do not have a TCP/IP environment, then you must use the printer control panel to enter your fax

setup information.

Using the control panel

1

From the control panel, navigate to:

Settings > Device > Preferences > Run Initial Setup

2 Turn o the printer, wait for about 10 seconds, and then turn on the printer.

3 On the Fax setup screen, conﬁgure the settings.

4 Finish the setup.

Using the Embedded Web Server

1

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the home screen. The IP address appears as four sets of numbers

separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Settings > Fax > Analog Fax Setup > General Fax Settings.

3 In the Fax Name ﬁeld, type the name to be printed on all outgoing faxes.

Set up, install, and conﬁgure 21

1

how do i change the language from manderin to english
Submitted on 17-8-2022 at 17:32
Reply Report abuse
I have an MC3224 printer attached to a DELL laptop with Windows 10 installed. I'm trying to set up to scan to the computer. All I can find is that I need an IP # for the printer, which I do not have or at least cannot find. What can I do to make this thing operate ? Submitted on 25-5-2022 at 00:33
Reply Report abuse
How do I disable the power saver setting to prevent hibernation?
Submitted on 24-1-2022 at 19:13
Reply Report abuse
My MC3224 displays a paper jam fault. There is no jam, but the printer will not reset the fault. Nothing I have done helps. Is there a way to reset the fault? Submitted on 14-10-2021 at 14:15
Reply Report abuse
Can you go back and open the setup wizard to make changes? Submitted on 10-4-2021 at 02:02
Reply Report abuse
can you go back and access set up wizard to make changes Submitted on 10-4-2021 at 02:01
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Lexmark MC3224 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark MC3224 in the language / languages: English as an attachment in your email.

The manual is 12,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark MC3224

Lexmark MC3224 User Manual - German - 201 pages

Lexmark MC3224 User Manual - Dutch - 197 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info