20690
126
Zoom out
Zoom in
Previous page
1/143
Next page
126
Print irregularities
Paper has absorbed moisture
due to high humidity.
You are using paper that does
not meet the printer
specifications.
The image transfer unit and
transfer roller are worn or
defective.
The fuser is worn or defective.
Load paper from a fresh package in the paper
tray.
Avoid textured paper with rough finishes.
Make sure the printer paper type, paper texture,
and paper weight settings match the type of
paper you are using.
Replace the image transfer unit and transfer
roller.
Replace the fuser.
Print too light
The Toner Darkness setting is
too light.
You are using paper that does
not meet the printer
specifications.
The print cartridges are low on
toner.
The print cartridges are
defective or have been installed
in more than one printer.
Select a different Toner Darkness setting from the
printer driver before sending the job to print.
Perform a Color Adjust in the Utilities Menu.
Load paper from a new package.
Avoid textured paper with rough finishes.
Make sure the paper you load in the trays is not
damp.
Make sure the printer paper type, paper texture,
and paper weight settings match the type of
paper you are using.
Replace the print cartridges.
Print too dark
The Toner Darkness setting is
too dark.
The print cartridges are
defective.
Select a different Toner Darkness setting from the
printer driver before sending the job to print.
Replace the print cartridges.
Transparency print
quality is poor
(Print has inappropriate
light or dark spots, toner
is smeared, horizontal or
vertical light bands
appear, or color does not
project.)
You are using transparencies
that do not meet the printer
specifications.
The Paper Type setting for the
tray you are using is set to
something other than
transparency.
Use only transparencies recommended by the
printer’s manufacturer.
Make sure the Paper Type setting is set to
Transparency.
Toner specks
The print cartridges are
defective.
The transfer roller is worn or
defective.
The image transfer unit is worn
or defective.
The fuser is worn or defective.
Toner is in the paper path.
Replace the print cartridges.
Replace the transfer roller.
Replace the image transfer unit.
Replace the fuser.
Call for service.
Symptom Cause Solution
ABCDE
ABCDE
ABCDE
126


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark C762 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark C762 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark C762

Lexmark C762 User Manual - Dutch - 218 pages

Lexmark C762 User Manual - Portuguese - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info