20690
124
Zoom out
Zoom in
Previous page
1/143
Next page
124
Solving print quality problems
You can solve many print quality problems by replacing a supply or maintenance item that has reached the
end of its intended life. Check the operator panel for a message about a printer consumable. See
Determining the status of supplies for information about other ways to identify consumables that need to
be replaced.
Use the following table to find solutions to print quality problems.
The page that jammed
does not reprint after
you clear the jam.
Jam Recovery in the Setup Menu
is set to Off.
Set Jam Recovery to Auto or On.
Blank pages feed into
the output bin.
An incorrect media type is loaded
in the tray being printed from.
Load the correct type media for your print job or
change the Paper Type on the operator panel to
match the type of media loaded.
Symptom Cause Solution
Repeating defects
Either the print cartridges are
defective, the image transfer unit
and transfer roller are defective, or
the fuser is defective.
Marks occur repeatedly only in one color and
multiple times on a page:
Replace the cartridge if the defects occur every:
48 mm (1.9 in.)
–97mm (3.8in.)
Marks occur down the page repeatedly in all
colors:
Replace the transfer roll if the defects occur every
60 mm (2.4 in.)
Check the first transfer bellcranks and springs or
replace the image transfer unit if the defects occur
every 101 mm (4 in.)
Replace the fuser if the defects occur every
148 mm (5.8 in.)
Marks occur on every third or sixth page in any
color:
Replace the image transfer unit.
Color
misregistration
Color has shifted outside of the
appropriate area or has been
superimposed over another color
area.
1 Re-seat the cartridges by removing them from the
printer and then reinserting them.
2 If you still have the problem, refer to the Color
Alignment section under the Utilities Menu.
See also Aligning the image transfer unit
Symptom Cause Solution
ABCDEABCDE
ABCDE
ABCDE
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark C762 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark C762 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark C762

Lexmark C762 User Manual - Dutch - 218 pages

Lexmark C762 User Manual - Portuguese - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info