20690
82
Zoom out
Zoom in
Previous page
1/143
Next page
82
Prog System Code
The printer is programming new
system code.
Wait for the message to clear and the
printer to reset.
Warning: Do not turn the printer off while
this message is displayed.
Program Flash
The printer is storing resources, such
as fonts or macros, in flash memory.
Wait for the message to clear.
Warning: Do not turn the printer off while
this message is displayed.
Programming Disk
The printer is storing resources, such
as fonts or macros, on the hard disk.
Wait for the message to clear.
Warning: Do not turn the printer off while
this message is displayed.
Programming Error
P<x>
An error occurred while the printer was
programming code into memory.
Correct the problem specified on the
second line of the display:
P105—A network file was used to
program a non-network printer, or a non-
network file was used to program a
network printer.
P109—An update file was used to
program the printer, but the information
did not fit within the space allocated in
the Master Boot Record.
P112—An upddle.fls file was used to
update the DLE code on a printer with a
firmware card installed, but the DLE was
not found on the firmware card.
P200—No firmware card is installed.
Queuing and Deleting
Jobs
The printer is deleting one or more
held jobs and sending one or more
jobs to print.
Wait for the message to clear.
See also: Printing and deleting held jobs
Queuing Jobs
The printer is sending one or more
held jobs to print.
Wait for the message to clear.
See also: Holding a job in the printer
Ready
The printer is ready to receive and
process print jobs.
Send a job to print.
Ready Hex
The printer is in Hex Trace mode and
is ready to receive and process print
jobs.
Send a job to print. All data sent to the
printer is printed in hexadecimal and
character representation. Control strings
are printed, not executed.
Turn the printer off and then on to exit
Hex Trace mode and return to Ready
status.
Reattach <device>
The specified device is either not fully
connected to the printer or is
experiencing a hardware failure.
Reestablish communication by removing
the specified device and reattaching it to
the printer.
•Press Go to clear the message and
continue printing without using the
device.
In the case of a hardware failure, turn
the printer off and back on. If the error
recurs, turn the printer off, remove the
specified device, and call for service.
See also: Calling for service
Message What this message means What you can do
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark C762 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark C762 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark C762

Lexmark C762 User Manual - Dutch - 218 pages

Lexmark C762 User Manual - Portuguese - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info