20690
80
Zoom out
Zoom in
Previous page
1/143
Next page
80
Load Manual
<type> <size>
A request for a manual feed job has
been sent to the printer. The printer is
ready for insertion of a single sheet
into the manual feed slot.
Load a sheet of the paper specified in
the second line of the display in the
manual feed tray or multipurpose feeder.
•Press Select or Go to ignore the manual
feed request and print on paper already
installed in one of the input sources. If
the printer finds a tray that has paper of
the correct type and size, it feeds paper
from that tray. If the printer cannot find a
tray with the correct paper type and size,
it prints on whatever paper is installed in
the default input source.
•Press Menu to open the Job Menu and
cancel the current job.
See also: Loading the multipurpose
feeder
Load <x> Plain Letter
Someone has initiated a tray
calibration procedure.
Load paper into <x> and press Go to
continue the calibration process.
Load Staples
The printer is trying to staple a print
job, but the stapler is empty.
Install a new staple cartridge in the
stapler.
•Press Go to clear the message and
continue printing without stapling.
•Press Menu to open the Job Menu and
cancel the current job.
Load Tray <x>
The printer is trying to feed paper from
a source it detects is empty.
Load paper of the size and type
requested in the second line of the
display in the specified tray. The printer
automatically clears the message and
continues printing the job.
•Press Menu to open the Job Menu and
cancel the current job.
See also: Loading the trays
Menus Disabled
The printer menus are disabled. You
cannot change the printer settings
from the operator panel.
You can still open the Job Menu to cancel a
job that is printing or to select a confidential
job or a held job that you want to print. If
you need access to the printer menus,
contact your network administrator.
See also: Disabling the operator panel
menus
Network Card Busy
An internal print server (also called an
internal network adapter or INA) is
being reset.
Wait for the message to clear.
Network <x>
A network interface is the active
communication link.
Wait for the message to clear.
Network <x>, <y>
A network interface is the active
communication link, where <x>
represents the active communication
link and <y> represents the channel.
Wait for the message to clear.
No DRAM Installed
No DRAM is installed in the printer. Turn the printer off, install DRAM and turn
the printer back on.
Message What this message means What you can do
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark C762 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark C762 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark C762

Lexmark C762 User Manual - Dutch - 218 pages

Lexmark C762 User Manual - Portuguese - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info