20692
123
Zoom out
Zoom in
Previous page
1/143
Next page
123
Solving option problems
Solving paper feed problems
Symptom Cause Solution
The option does not
operate correctly after
it is installed, or it
stops working.
The option is not installed
correctly.
Remove the option, and then reinstall it.
Cables connecting the option to
the printer are not attached
correctly.
Check the cable connections.
Refer to the Setup Guide for instructions.
The printer driver does not
recognize that the option is
installed.
Your printer driver may not automatically recognize
that an option is attached to your printer. Look at the
driver settings and verify that all the printer
configuration settings are correct.
Symptom Cause Solution
Paper frequently jams. You are using paper that does not
meet the printer specifications.
Use recommended paper and other specialty media.
Refer to the Card Stock & Label Guide available on
our Lexmark Web site at www.lexmark.com for
detailed specifications.
See Clearing the entire paper path, Clearing
fuser jams, Clearing image transfer unit jams,
Clearing mailbox or output expander jams (Area
M), or Paper and specialty media specifications
for more information.
See Avoiding jams for information that can help
prevent jams from occurring.
You have loaded too much paper
or too many envelopes.
Make sure the stack of paper you load does not
exceed the maximum stack height indicated at the
front of the tray or on the multipurpose feeder.
See Loading the trays or Loading the
multipurpose feeder for more information.
Guides in the selected tray are not
set to the appropriate position for
the size paper loaded.
Move the guides in the tray to the correct position.
See Loading the trays for detailed instructions.
The paper has absorbed moisture
due to high humidity.
Load paper from a fresh package.
Store paper in its original wrapper until you load it.
See Storing paper for more information.
The Paper Jam
message remains after
you remove the
jammed paper.
You have not cleared the entire
paper path, or you did not open
the door specified by the message
to check for jams in this area.
Clear paper from the entire paper path, open the
door indicated by the operator panel message, clear
the jam, and close the door. The printer resumes
printing.
See Clearing image transfer unit jams, Clearing
fuser jams, Clearing the entire paper path, or
Clearing mailbox or output expander jams (Area
M) for more information.
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark C760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark C760 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark C760

Lexmark C760 User Manual - Dutch - 218 pages

Lexmark C760 User Manual - Portuguese - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info