20692
122
Zoom out
Zoom in
Previous page
1/143
Next page
122
Solving mailbox problems
Job prints from the
wrong tray or on the
wrong paper or
specialty media.
The operator panel menu
settings do not match the
media loaded in the tray.
Make sure the Paper Size and Paper Type specified on the
operator panel and in the printer driver are correct for the job
you are printing.
Incorrect characters
print.
You are using an
incompatible parallel
cable.
If you are using a parallel interface, make sure you are using
an IEEE 1284-compliant parallel cable. We recommend
Lexmark part number 1329605 (10 ft) or 1427498 (20 ft) for
the standard parallel port.
The printer is in Hex
Trace mode.
If Ready Hex appears on the display, you must exit Hex Trace
mode before you can print your job. Turn the printer off and
back on to exit Hex Trace mode.
Tray linking does not
work.
Tray linking is not
configured properly.
To configure the linked trays:
Make sure the Tray x Type value in the Paper Type menu
item in the Paper Menu is the same for all linked trays.
Make sure the Tray x Size value in the Paper Size menu
item in the Paper Menu is the same for all linked trays.
Large jobs do not
collate.
Collate is not set to On. Set Collation to On in the Finishing Menu or through the
printer driver.
Note: Setting Collation to Off in the driver overrides the
setting in the Finishing Menu.
The job is too complex. Reduce the complexity of the print job by eliminating the
number and size of fonts, the number and complexity of
images, and the number of pages in the job.
The printer does not
have enough memory.
Add printer memory or an optional hard disk.
Refer to the Setup Guide for information on selecting memory
options to install.
Unexpected page
breaks occur.
The job has timed out. Set Print Timeout to a higher value from the Setup Menu.
Symptom Cause Solution
Paper jams before
reaching the mailbox.
The mailbox and the
printer are misaligned.
Realign the mailbox and the printer.
Refer to the Setup Guide for instructions.
See Clearing mailbox or output expander jams (Area M)
for more information.
The mailbox is not
connected properly.
Check the electrical connection.
Refer to the Setup Guide for instructions on connecting the
mailbox to the printer.
Symptom Cause Solution
122


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark C760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark C760 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark C760

Lexmark C760 User Manual - Dutch - 218 pages

Lexmark C760 User Manual - Portuguese - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info