20464
90
Zoom out
Zoom in
Previous page
1/145
Next page
Solving display problems
90
Troubleshooting
Solving display problems
Solving printing problems
Symptom Cause Action
Operator panel shows
only diamonds or is
blank.
The printer self test failed. Turn the printer off, wait about 10 seconds, and turn the printer
on.
The clock appears on the operator panel. When the test is
completed, Ready appears.
If the messages do not appear, turn the printer off. For technical
support, contact the Lexmark Customer Support Center at
http://support.lexmark.com.
Menu settings changed
from the operator panel
have no effect.
Settings in the software
application, the printer
driver, or the printer
utilities are overriding the
settings made from the
operator panel.
Change the menu settings from the printer driver, the printer
utilities, or the software application instead of the operator panel.
Disable the settings in the printer driver, the printer utilities, or the
software application so the settings from the operator panel can
be changed.
LCD is too light or too
dark.
The LCD Contrast setting
is not adjusted.
Adjust the LCD Contrast setting. See Adjusting operator
panel contrast.
Symptom Cause Solution
Jobs do not print. The printer is not ready to
receive data.
Make sure Ready or Power Saver appears on the display
before sending a job to print.
The standard bin is full. Remove the stack of paper from the standard bin.
The specified tray is
empty.
Load paper in the tray.
See Loading media for detailed instructions.
The wrong printer driver is
being used or printing to a
file has been tried.
Verify the selection of the printer driver associated with the
printer.
If a USB port is in use, make sure the operating system and
printer driver are compatible.
The MarkNet N8000
Series internal print
server is not set up
properly or is not
connected properly.
Verify the proper configuration for the printer for network
printing.
See the drivers CD or the Lexmark Web site for information.
The wrong interface cable
is in use, or the cable is
not securely connected.
Use a recommended interface cable.
See the Setup sheet for cable specifications.
Held jobs do not print. A formatting error has
occurred.
Print the job. (Only part of the job may print.)
Delete the job.
Add an optional memory card.
Free up additional printer memory by scrolling through the list of
held jobs and deleting others sent to the printer.
The printer has
insufficient memory.
The printer has received
invalid data.
Delete the job.
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark C522 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark C522 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark C522

Lexmark C522 User Manual - Dutch - 35 pages

Lexmark C522 User Manual - Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info