765511
22
Zoom out
Zoom in
Previous page
1/30
Next page
22 / 30
d) Hints for optimum use
If the grass is longer than approximately 10 cm, make two cuts to obtain a better finish. At first
mow at maximum height of cut and then adjust to a low or medium height of cut.
In order to achieve optimum results, only mow dry grass.
7. Technical data
Model LM 32 K LM 32 A
Type SF7A113-2 SF7A102-02
Voltage (V~ / Hz) 220-240 / 50 220-240 / 50
Power Input (W) 1000 1000
No-Load Speed (min-1) 3300 2800
Height adjustment (mm) 25 / 43 / 62 25 / 43 / 62
Width of cut (mm) 320 320
Grass box volume (l) 30 30
Weight (kg) 9,8 12,1
Class of insulation / Class of protection II / IPX4 II / IPX4
Sound pressure LpA (dB(A)) / K (dB(A)) 78,9 / 3 75,1 / 3
Sound power level LwA (dB(A)) measured / guaranteed 89 / 96 87,2 / 93
Vibration level ahv (m/s2) / K (m/ s2) 2,60 / 1,5 0,789 / 1,5
8. Cleaning, maintenance and ordering of spare parts
Warning! Before proceeding, remove the plug from the socket.
a) Cleaning
Keep all safety devices, air vents of the motor hood free of dirt and dust as far as possible. Use a
clean cloth or compressed air at low pressure.
We recommend that you clean the device immediately each time you have finished using it.
Regularly clean the equipment with a moist cloth and some soft soap. Do not use abrasive
cleaning agents or solvents; these could attack the plastic parts of the equipment. Ensure that no
water can seep into the device.
Never clean the mower (except grass box separated from the mower) by stream of water or a
pressure washer.
b) Checking and replacing the cutting blade (Fig. G)
For safety reasons, we recommend having the blade replaced by an authorized person.
Warning! Ensure the blade has completely stopped and the appliance disconnected from the mains.
Warning! Use only use the original spare blade.
Important! Wear heavy-duty work gloves to grip the blade!
Blade maintenance
If the blade is dull, sharpen it or replace it with a new one.
To sharpen the blade, remove the blade from the mower (see below), clamp it in a vice and file the
cutting edge evenly. Be careful when grinding on each side as well. Before installing the blade into
the mower, check its balance. An unbalanced blade is the cause of increased vibration with risk of
damage of the mower.
If the blade is damaged, immediately replace it with a new one.
To remove the blade:
Turn the appliance onto its side.
Using heavy-duty gloves, grip the blade (1).
Use the correct spanner and remove the blade bolt (2) by turning the spanner anti-clockwise.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Levita LM 32A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Levita LM 32A in the language / languages: English, German as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info