765511
21
Zoom out
Zoom in
Previous page
1/30
Next page
21 / 30
4. Before use
a) Connecting to mains (Fig. C)
Connect the extension cable to plug (Fig. C1) and fasten it to the cable holder (Fig. C2 and C3).
Connect the opposite end of the extension cable to the appropriate mains socket.
b) Fitting the grass collection box (Fig. D)
Lift the deflector plate and place the grass collection box over the relevant lugs (Fig. D).
c) Cutting Height Adjustment (Fig. E)
Cutting height is adjusted by changing the position of the front and rear axles to one of three positions
(heights of cut grass).
Turn the mower upside down.
Pull the axle from the grooves on both sides of the body and move it to any other pair of grooves
and then release (Fig. E1).
Warning! Ensure the blade completely stopped and the appliance disconnected from the mains before
changing the height of cut.
Important: Make sure both sides of each axle as well as both axles are at the same height (Fig. E2).
5. Switching on and off (Fig. F)
a) Switching on
Push in and hold the lock-off button (1, Fig. F1).
Pull the ON/OFF switch lever (2, Fig. F2) towards the handle.
Hold the lever and release the lock-off button.
b) Switching off
Release the ON/OFF switch lever (2).
Warning: Never attempt to lock a switch in the on position.
6. Use
Warning! Let the appliance to work at its own pace. Do not overload.
a) Mowing
We recommend using your mower as outlined in the Figures H in order to achieve optimum results
and to reduce the risk of cutting the supply cable.
Place the bulk of the supply cable on the lawn, close to the starting point (position 1).
Switch the appliance on as described above.
Proceed as shown in the left picture.
Mowe from position 1 to position 2.
Turn right and proceed towards position 3.
Repeat the above procedure as required.
Warning: Do not mow towards the cable as shown in the right picture.
b) Emptying the grass collection box
Release the ON/OFF switch lever.
Remove the grass collection box and empty the contents from the box.
c) Carrying the mower
Warning! Ensure the blade has completely stopped and the appliance disconnected from the mains
before carrying.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Levita LM 32A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Levita LM 32A in the language / languages: English, German as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info