601209
7
Zoom out
Zoom in
Previous page
1/15
Next page
E-6
NOTE: The clock settings may be lost if the main power switch is turned off and the
battery drains after a period of time. If this occurs, you will need to reset the clock.
LI
STENING TO THE R
A
DIO
1. Press and hold the button (#10) to turn on the unit.
2. Tap the button (#10) to select Radio mode, the radio frequency
will show on LED Display (#12).
3. Press and hold the button (#4) or button (#5) to search for the next /
previous available station. If the reception is poor, try Manual Tuning to fine-tune
the station.
4. Press the button (#4) or button (#5) briefly to manually tune through
the frequency band.
5. Adjust the volume control to the desired volume level.
6. If no button is pressed for 5 seconds in radio mode, the display will change to
show current time. You can tap the button (#4) or button (#5) to check
the tuned frequency.
7. Press and hold the button to turn the unit into Standby mode after
listening.
8. Always slide the Power switch to the OFF position when not in use to prevent
draining the internal battery.
FM Mono & FM-Stereo reception
- Press the FM ST/MONO button (#3) to select stereo mode, the LED Display (#12) will
show “St a few seconds and then resume to show the frequency.
- It is preferable to receive the program in mono when you are receiving a weak station.
Press the FM ST/MONO button (#3) to select Mono mode, the LED Display (#12) will
show “St OF” a few seconds and then resume to show the frequency.
TIPS FOR BEST RADIO
RECEPTIO
N:
To insure maximum FM tuner reception, fully extend the TELESCOPIC ANTENNA (#1)
for best FM radio reception.
Setting the Radio Station Presets
The SR-600 BT allows you to store up to 30 stations for easy recall at any time.
1. Press and hold the button (#10) to turn on the unit.
2. Tap the (#10) button to select radio mode.
3. Tune to the radio station either you want to store in memory.
4. Press and hold the PRESET/TIME SET button (#2). The preset channel number
“P01” will be flashing on display.
5. Tap the button (#4) or button (#5) to select the preset number (P01-P30).
6. Tap the PRESET/TIME SET button (#2) to confirm.
7. To store up to 30 station presets, repeat steps 3 to 6 above.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco SR-600 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco SR-600 BT in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco SR-600 BT

Lenco SR-600 BT User Manual - German - 22 pages

Lenco SR-600 BT User Manual - Dutch - 17 pages

Lenco SR-600 BT User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info