601209
6
Zoom out
Zoom in
Previous page
1/15
Next page
E-5
Backup Batteries
Batteries are preloaded in the unit. Remove the insulation tab from the battery
compartment to activate the battery back-up before first use.
To replace the batteries, carefully open the battery door of the BATTERY BACK-UP
COMPARTMENT (#21). Remove the old batteries and follow the polarity marking to
insert 2 x new LR44/AG13 button cells into the compartment and close the battery door.
BATTERY WARNING
1. Be sure that the batteries are installed correctly. Wrong polarity may damage the
unit.
2. Use only the size and type of batteries specified.
3. Do not mix old and new batteries.
4. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
5. If the unit is not to be used for an extended period of time, remove the batteries.
Old or leaking batteries can cause damage to the unit and may void the warranty.
6. Do not try to recharge batteries not intended to be recharged; they can overheat
and rupture. (Follow battery manufacturer’s directions).
7. Do not dispose of batteries in fire, batteries may leak or explode.
NOTE: These speakers are not magnetically shielded and may cause color distortion
on the screen of some TVs or video monitors. To avoid this, you may need to move the
speakers further away from the TV or monitor if unnatural color shifts or image
distortion occurs.
TURN THE UNIT POWER ON/OFF
Power on/off the unit
When using either the AC adaptor or battery, first slide the MAIN POWER ON/OFF
SWITCH (#15) on the back of the unit to the ON position. The POWER INDICATOR
(#19) will turn on, LED DISPLAY (#12) will turn on and display the time.
Press and hold the FUNCTION/ button (#10) to turn the SR-600 BT to On or
Standby.
To switch off the unit, slide the MAIN POWER ON/OFF SWITCH (#15) to OFF position.
CLOCK SETTING
Note: When you turn the unit on for the first time, 12:00 will show on the LED display
and flashing.
1. In standby mode, press and hold the PRESET/TIME SET button (#2), the hour
digits will flash.
2. Tap the button (#4) or button (#5) to adjust hour. Press and hold the
button (#4) or button (#5) for fast reverse/advance setting.
3. Tap the PRESET/TIME SET button (#2) to confirm the hour setting, the minute
digits will flash to prompt for input.
4. Tap the button (#4) or button (#5) to adjust minute. Press and hold the
button (#4) or button (#5) for fast reverse/advance setting.
5. Tap the PRESET/TIME SET button (#2) to complete the setting.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco SR-600 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco SR-600 BT in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco SR-600 BT

Lenco SR-600 BT User Manual - German - 22 pages

Lenco SR-600 BT User Manual - Dutch - 17 pages

Lenco SR-600 BT User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info