694820
7
Zoom out
Zoom in
Previous page
1/37
Next page
Clock and Alarm Operation
Setting the Clock Press the HOUR button to select your desired hour, if you press the HOUR
Button steady, the hour will increase quickly. Press the MINUTE Button to select your desired
minutes, if you Press the MINUTE Button steady, the minute will increase quickly.
Alarm the Buzzer
Set the Function switch to Buzzer mode, press Clock/Alarm button, “AL” show on display,
Press HOUR and MINUTE button respectively to adjust desired alarm hour and minute.
Press the AL/ON/OFF Button to open the alarm.
Note: The alarm of buzzer could continue for 3 minutes! Alarm can be OFF by pressing
AL/ON/OFF button at any time.
Alarm the Radio
Set the radio band (FM/FM ST.) which you desired to alarm.
Set the Function switch to AUTO mode, press Clock/Alarm button,AL” show on display.
Press HOUR and MINUTE button respectively to adjust desired alarm hour and minute.
Press the AL/ON/OFF Button to open the alarm. Adjust the desired volume
If the current time is the same as the time which you setting, then the setting radio will be
alarm up.
Note: The alarm of radio could continue for 1 hour! Alarm can be OFF by pressing
AL/ON/OFF button at any time.
FAQs
Solution
Check that the system is connected to a working mains outlet.
Check that the volume control is not at minimum setting.
Adjust the location of the antenna for best signal reception.
If none of the above solution work, try unplugging your Radio.
Specifications
Frequency ranges
FM 87.5-108MHz
Input connector
RCA AUX IN
Aerial
antenna
Power supply
AC 230V 50Hz
Output power
2 x 3W RMS
Battery Backup
3V 2xAAA
Guarantee
Lenco offers service and warranty in accordance with the European law, which means that in
case of repairs (both during and after the warranty period) you should contact your local
dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way,
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco SR-02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco SR-02 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info